Journal of the Korean Ceramic Society (한국세라믹학회지)

The Korean Ceramic Society (한국세라믹학회)
권호 표지

Formation of Solid Solution and Microstructure in Processureless sintered SiC-AlN Composite

상압소결에 의하여 제조된 SiC-AlN 복합체에서의 고용체 형성과 미세구조

  • 이종국 (조선대학교 재료공학과) ;
  • 김덕준 (서울대학교 무기재료공학과) ;
  • 김환 (서울대학교 무기재료공학과)
  • Published : 1996.07.01
Download PDF
⟨ Previous Next ⟩

Abstract

Formation of Solid Solution and Microstructure in Processureless sintered SiC-AlN compo-site using oxides as a sintering aid at 185$0^{\circ}C$ and 195$0^{\circ}C$ Regardless of SiC/AlN ratio in composition most of sintered specimens showed he complex structure mixed with 2H solid solution and SiC particles. High sintering temperature and large AlN content in starting composition enhanced the formation of 2H solid solution in sintered specimen 2H solid solution showed the spherical shape and core-rim structure. AlN content in the core is higher than that in the rim but SiC content . The size of 2H solid solution on fracture showed the transgranular fracture mode compared with the dispersed SiC particles which showed the intergranular fracture mode.

Keywords

References

  1. Structural Ceramics The Silicon Carbide Family of Structural Ceramics M. Srinivason;J.B Wachtmas, Jr(ed.)
  2. Silicon-Carbide Ceramics Properties and Applications of Silicon Carbide Ceramics K. Yamada;M. Mohri;S. Somiya(ed.);Y. Inomata(ed.)
  3. J Am. Ceram. Soc. v.77 In Situ-Toughened Silicon Carbide N.P. Padture
  4. J. Am. Ceram. Soc v.77 Tougheness Properties of a Silicon Carbide with an in Situ Induced Heterogeneous Grain Structure N.P. Padture;B.R. Lawn
  5. Powder Metall. Int. v.10 The Influence of Boron and Carbon Additions on the Microstructure of Sintered Alpha Silcon Carbides W. Bocker;H. Hausner
  6. Ceram Trans. v.7 Sintering of Silicon Carbide with Rare Earth Oxide Additions L. Cordrey;D.E. Niezs;D.J. Shanefield
  7. J. Am. Ceram. Soc v.75 no.4 Phase Separation in the SiC-AiN Pseudobinary System:the Role of Coherency Strain Energy J. Chen.;Q. Tian;A.V. Virkar
  8. J. Am. Ceram. Soc. v.70 no.6 Modulated Structure in SiC-AiN Ceamics S. Kuo;A.V. Virkar;W. Rafaniello
  9. J. Ceram. Soc. Japan. v.101 no.7 Microstructure and Mechanical Preperies of SiC-AiN Ceramics after Phase Separation Treatment M. Miura;T. Yogo;S. Hirano
  10. J. Am. Ceram. Soc. v.77 no.12 R-Curve Behavior and Stable Crack Growth at Elevated Temperature(1500-1600°C)in a Si₃N₄/SiC Nanocomposite T. Rouxel;F. Wakai;S. Sakaguchi
  11. J. Ceram. Soc. Japan v.99 no.10 New Design Concept of Structural Ceramics-Ceramic Nanocomposite K. Nihara
  12. Silicon Carbide '87 Alloying of Silicon Carbide with Other Ceramic Compounds-a Review A. Zangvil;R. Ruh;J.D. Cawley(ed.);C.E. Semler(ed.)
  13. J. Am. Ceram. Soc. v.71 no.10 Phase Relationships in the Silicon Carbide-Aluminum Nitride System A. Zangvil;R. Ruh
  14. J. Am. Ceram. Soc. v.65 no.5 Composition and Properlies of Hot-pressed SiC-AlN Solid Solutions R. Ruh;A. Zangvil
  15. J. Am. Ceam. v.66 no.3 Effect of Hot-pressing Temperature on the Thermal Diffusivity/Conductivity of SiC/AlN Composites L.D. Bentsen;D.P.H. Hasselman;R. Ruh
  16. J. Japan Inst. Metals v.56 no.12 High Temperature Strength of SiC-AlN Solid Solutions and Composites as Evaluated by Small Punch Tests J.F. Li;A. Kawasaki;R. Watanabe
  17. J. Am. Ceram. Soc. v.75 Eutectic Composition in the Pseudobinary of (TEX)$Y_4Al_2O_9 and Y_2O_3$(/TEX) T.I. Mah;M.D. Petry
  18. J. Ceram. Soc. Japan v.101 no.11 Simple Calculation of SiC Polytype Contents from Powder X-ray Diffraction Peaks H. Tanaka;N. Iyi
  19. Am. Ceram. Soc. Bull. v.64 Effect of Sintering Tempeatures on the Physical and Crystallographic Properties of β-SiC R.M. Williams;B.N. Juterbock;S.S. Shinozaki;C.R. Peters;T.J. Whalen
  20. J. Ceram. Soc. Japan v.103 Microstructural Variation between Surface and Inside of Liquid-Phase Sintered β-SiC J.K. Lee;H. Tanaka
  21. Am. Ceram Soc. Bull v.70 Low Temperature Pressureless Sintering of β-Silicon Carbide with Aluminum Oxide and Yttrium Oxide Addilitions M.A. Mulla;V.D. Krstic
  22. J. Mater Sci. v.29 Pressureless sintering of β-SiC with Al₂O₃ Additions M.A. Mulla;V.D. Krstic
  23. J. Mat. Sci. v.26 Pressureless Sintering of AlN-SiC Composites W. Wei;R. Lee
  24. Proc. of Inter. Symp. on Ceramic Components for Engine Ceramic Alloys of Silicon Carbide with Aluminum Nitride and Nitrogen M.M. Patience;P.J. England;D.P. Thompson;K.H. Jack
  25. The Ceram. Int. v.17 The SiC-AlN System:Influence of Elaboration Routes on the Solid Solution Formation and its Mechanical Properties M. Landon;F. Thevenot
  26. J. Mater. Sci. Lett v.10 Plasma Etching of Non-oxide Ceramics M. Mitomo;Y. Sato;I. Yashima;M. Tsutsumi
  27. J. Am. Ceram. Soc. v.75 no.2 Microstructure and Mechanical Properties of Hot-Pressed Silicon Carbide-Aluminum Nitride Compositions Y. Xu;A. Zangvil;M. Landon;F. Thevenot
  28. Ceram. Eng. Sci. Proc. v.11 no.7;8 Fabrication, Microstructure and Properties of SiC-Aln Ceramic Alloys R. Lee;W. Wei
  29. J. Am. Ceram. Soc. v.76 Core/Rim Structure of Liquid-Phase-Sintered Silicon Carbide L.S. Sigl;H.J. Kleebe
  30. J. Mater Sci. Lett. v.14 Grain Morphology of SiC-AlN Ceramics by Pressureless Sintering W. Choi;J.K. Lee;H. Kim
  31. J. Ceram. Soc. Japan v.103 no.9 Preparation of SiC-AIN Composites by Liquid Phase Sintering and their Microstructure J.K. Lee;H. Tanaka;S. Otani