Preparation and Characteristics of $Y_2O_3-CeO_2-ZrO_2$Structural Ceramics ; I. Synthesis and Sinterability of Powder

$Y_2O_3-CeO_2-ZrO_2$ 구조세라믹스의 제조 및 특성 : I 분말의 합성 및 소결성

  • 오혁상 (부산대학교 무기재료공학과) ;
  • 이윤복 (부산대학교 무기재료공학과) ;
  • 김영우 (포항산업과학연구원) ;
  • 오기동 (부산대학교 무기재료공학과) ;
  • 박흥채 (부산대학교 무기재료공학과)
  • Published : 1996.09.01

Abstract

Y2O3-CeO2-ZrO2 powders were prepared from water-soluble salts using a coprecipitation method. The forming process of oxide and the characteristics of the calcined powders treated in different drying conditions were investigated. The oxidation was occurred at the temperature of around 40$0^{\circ}C$ and the main crystallization of ZrO2 around $600^{\circ}C$. On calcination at $600^{\circ}C$ heating lamp-dried powders consisted of agglomerates of globular morphology with average agglomerate size of 2.27${\mu}{\textrm}{m}$ and specific surface area of 68.3m2/g and spray dried powders contained dense spheric particles with average agglomerate size of 1.35${\mu}{\textrm}{m}$ and specific surface area of 11.0m2/g which exhibited low agglomeration tendency. Removal of the water by a freeze-drying technique produced calcined powders containing flake-like secondary particle structures with wide agglomerate size distri-bution of 0.1-60${\mu}{\textrm}{m}$ and specific surface area of 24.5${\mu}{\textrm}{m}$. The 20 MPa-pressed density (36.8-41.4% T,D) of calcined powders did not nealy depend on drying methods whilst compaction ratio of calcined powders derived from freeze-drying was the highest ( 6.24) among three drying methods. On continuous heating up to 150$0^{\circ}C$ the sinterability of calcined powders derived from heating lamp-drying was superior to those derived from spray-and freeze-drying. The final sintered density of calcined powders was the highest (96% T,D at 150$0^{\circ}C$) in case of heating lamp-drying.

Keywords

References

  1. Advances in Ceramics;Science and Technology of Zirconia v.3 Zirconia-an Overview E.O. Subbaro;A.H. Heuer(ed.);L.W. Hobbs(ed.)
  2. Advances in Ceramics;Science and Technology of Zirconia Ⅲ v.24 Improvement to the Thermal Stability of Yittria-Doped Tetragonal Zirconia Polycrystals by Alloying with Various Oxides T. Sato;S. Ohtaki;T. Endo;M. Shimada;S. Sumiya(ed.);N. Yamamoto(ed.);H. Hanagida(ed.)
  3. J. Euro. Ceram. Soc v.10 Zirconia Stabilized with Mixture of the Rare Earth Oxides W. Pada;D. Harberko
  4. J. Euro.Ceram.Soc v.9 Effect of Dopants on the Sintering Behaviour and Stability of Tetragonal Zirconia Ceramics G.S.A.M. Theunissen;A.J.A. Winnubst;A.J. Burggraaf
  5. Advances in Ceramics;Science and Technology of Zirconia Ⅱ v.12 Thermal and Mechanical Properties of Y₂O₃-Stabilized Tetragonal Zirconia Polycrystals K. Tsukuma;Y. Kubota;T. Tsukidate;N. Claussen(ed.);M.R. hle
  6. Am. Ceram. Soc. Bull v.65 no.10 Machanical Properties and Thermal Stability of CeO₂ Containing Tetragonal Zirconia Polycrystals K. Tsukuma
  7. J. Am. Ceram. Soc v.71 no.10 Sintering, Microstructure, Hardness, and Fracture Toughness Behaviour of Y₂O₃-CeO₂-ZrO₂ J.G. Duh;H.T. Dai
  8. J. Mater. Sci v.24 Fabrication and Sinterability in Y₂O₃-CeO₂-ZrO₂ J.G. Duh;M.Y. Lee
  9. J. Am. Ceram. Soc v.67 no.7 Sintering of ZrO₂in HCI Atmospheres M.J. Readey;D.W. Readey
  10. Infrared Spectra of Inorganic Compounds(3800~45$cm^{-1}$) R.A. Nyquist;R.O. Kagel;Academic Press Inc(ed.);Narcourt Brace Joranorich, Publishers(ed.)
  11. J. Am. Ceram. Soc v.54 no.5 Infrared and Raman Spectra of Zirconia Polymorphs C.M. Phillippi;K.S. Mazdiyasni
  12. J. Am. Ceram. Soc v.57 no.1 Raman Scattering Study of the Crystalization and Phase Transformation of ZrO₂ V.G. Keramidas;W.B. White
  13. Characterization of Ceramics R.E. Loehamann;L.E. Fitzparick;Butterworth-Heinemann INc(ed)
  14. Advances in Ceramics;Science and Technology of Zirconia Ⅱ v.12 Sinterability of ZrO₂and Al₂O₃Powders:The Role of Pore Coordination Number Distribution F.F. Lange;B.I. Davis;N. Claussen(ed.);M. Ruhle(ed.)
  15. Advances in Ceramics;Science and Technology of Zirconia Ⅱ v.12 Sintering Kinetics of ZrO₂ Powders A. Roosen;H. Hausner;N Claussen(ed.);M. Ruhle(ed.)