Effects of Binder Burnout Temperatures on Sintering Shrinkage of Multilayer Ceramics

다층 세라믹스의 소결 수축율에 대한 Binder Burnout 온도의 영향

  • 성재석 (연세대학교 세라믹공학과) ;
  • 구기덕 (전자부품종합기술연구소) ;
  • 윤종광 (전자부품종합기술연구소)
  • Published : 1996.12.01

Abstract

Change of sintering shrinkage in alumina-based multilayer ceramics was observed in various lamination condi-tions and binder burnout (BBO) temperatures. It was found that the linear shrinkages in X and Y directions were nearly the same with the BBO temperatures but a large shrinkage difference in Z direction was observed. However this phenomenon was diminished when BBO temperature was increased. A linear relationship between the laminated density and the sintering shrinkage was found and the slope was independant on the BBO temperature but dependant on the shrinkage direction.

Keywords

References

  1. Solid State Technology no.Jan Ceramic for Packaging Part 1,2 D.L. Wilcox
  2. Am. Ceram. Soc. Bull. v.67 no.4 Ceramics in Microelectronic Packaging R.R. Tummala
  3. J. Am. Ceram. Soc. v.75 no.10 Microstructural Characterization of Cofired Tungsten-Metallized High-Alumina Electronic Substrates G. Behrens;A.H. Heuer
  4. Microelectronics Packaging Handbook R.R. Tummala;E.J. Rymaszewski
  5. J. Mat. Sci. v.24 Cosintering of Alumina with Cobalt of Chromium doped Tungsten at 1400℃ J. Guille;A. Bettinell;J. Boissier;J.C. Berniers
  6. セラミゾク 多層配線基板 大塚寬治
  7. J. Am. Ceram. Soc. v.76 no.1 Evolution of Carbon during Burnout and Sintering of Tape-Cast Aluminum Nitride H. Yan;W.R. Canon;D.J. Shanefield
  8. J. Am. Ceram. Soc. v.75 no.9 Effect of Pressing Method on Organic Burnout J. Wang
  9. J. Kor. Ceram. Soc. v.33 no.11 Shrinkage Control with Variation of Lamination Condition in Multilayer Ceramics J.S. Sung;K.D. Koo;C.K. Yoon