충격하중을 받은 CFRP적층판의 피로굽힘강도에 미치는 적층구성의 영향

Influence of Stacking Composition on Fatigue Bending Strenght in CFRP Composite Laminates Subjected to Impact Loading

  • 발행 : 1996.08.01

초록

The purpose of present paper is to estimate the static and fatigue bending strengths of CFRP(carbon fiber reinforced plastic) laminates having impact damage(FOD). The specimens which are formed with the different stacking composition, EPOXY and PEEK matirx and orthotropic and quasi-isotropic laminated plates, are prepared for this experiment. A steel ball is impacted on CFRP laminates, generating impact damages, and the three-point fatigue bending test is carried out by using the impacted laminates to investigate the influence of the stackin composition on the fatigue strength of CFRP laminates.

키워드

참고문헌

  1. Journal of Composites Technology & Research v.16 no.3 Residual Strength of Impacted Composites : Analysis and Tests Gottesman T.;Girshovich S.(etc.)
  2. Journal of Composite Materials v.28 no.8 Damage Extension in Carbon Fiber/PEEK Laminates under Low Velocity Impact Wang H.;Vu-Khanh T.
  3. 日本航空宇宙學會誌 v.37 no.25 橫衡擊を受ける CFRP板の損傷と殘留曲け强度 田中吉;え助;黑川知明ら
  4. JSME(A) v.59 no.568 Analysis of Mode Ⅰ Interlamina Fracture behavior in Unidirectional CFRP Laminates Arakawa K.;Takahash K.
  5. Hydrothermal effect on the PEEK/C.F. and PP.S/C.F. under Impact Loading(Ⅰ) Ma C. C.;Huang Y. H.;Chang M. J.
  6. 日本複合材料學會誌 v.11 no.4 복합재료の 衡擊應答と破壞(Ⅰ) 武田展雄
  7. Composite Struct. The Damage Tolerance of Carbon Fiber Reinforced Composites-A Workshop Summary, Challenger K.D.
  8. Composites Struct. v.14 no.4 Effect of Impact Loading on Damage and Residual Compressive Strength of CFRP Laminated Beams Ishai O.;Shragi A.
  9. Journal of Composite Materials v.29 no.10 Influence of Stacking Sequence on the Transverse Matrix Cracking in Continuous Fiber Crossply Laminates Lud-yu Xu
  10. 材料 v.39 no.438 CFRPの疲勞損傷の超音波顯微鏡フラクタトグラフイ層問はく進展抵抗 駒井;箕島;木下;小川;黑田
  11. Composite Materials : Fatigue and Fracture, ASTM STP, 907 Response of Thick, Notched Laminates Subjected to Tension-Compression Cycle Loads Bakis, C. E.;Stinchcomb, W. W.;Hanh H. H.(編)
  12. Compositex and Metals, ASTM, STP. 948 Determination of crack propagation Directions in Graphite/Epoxy structures Smith B. W.;Grove R. A.
  13. ASTM. STP. 1012 Delamination Damage in Central Impacts at Subperformation Speeds on laminated Kevlar/EPOXY Plates Malvern L. E.;Sun C. T.;Liu D.