Evaluation of Surface Crack and Blind Crack by Induced Current Focusing Potential Drop(ICFPD) Technique

집중유도형 교류전위차법에 의한 표면결함 및 이면결함의 평가에 관한 연구

  • Kim, Hoon (Korea Atomic Energy Research Institute (KAERI))
  • 김훈 (한국원자력 연구소)
  • Published : 1996.09.20

Abstract

In the life management safety evaluation of constructs base on a fracture mechanics, the size of defect is the very important parameter. ICFPD (Induced Current Focusing Potential Drop)technique has been developed for detecting and sizing of defects that exist not only on surface but also inside and interior of structural components. The principle of this technique is to induce a focusing current at an exploration region by a straight induction wire through which an alternating current (AC)flows that has constant amplitude and frequency. The potential distributed on the surface of metallic material is measured by potential pick-up pins that are settled on the probe. In this paper, this NDI technique was applied to the evaluation of surface cracks and blind cracks in plate specimens. The results of this study show that in the case of surface crack, the distribution of potential drop is varied with the inched angle of surface crack, and the potential drops in the crack region and the crack edge region are varied with the inclined angle and depth of crack. The distribution of potential drop for the blind crack is distingulished from that for the surface crack, and the potential drop in the crack region is varied with the depth of crack.

파괴역학을 기초로 한 구조물의 수명 관리와 안전성 평가에 있어서, 결함의 크기는 매우 중요한 변수인자이다. 집중유도형 교류전위차법(ICFPD)은 구조물 부재의 표면, 이면 및 내면에 존재하는 결함을 검출하고, 그 크기를 측정하기 위하여 개발하였다. 본 비파괴법의 원리는 교류 전류가 흐르는 하나의 도선에 의하여 국부적인 영역에 전류를 집중적으로 유도하는 것을 이용하였다. 도선에 흐르는 전류는 일정 크기와 주파수를 갖는다. 금속표면에 유도된 전위는 탐촉자에 설치된 전위측정용 단자(potential pick-up pins)로 측정한다. 본 논문은 집중유도형 교류전위차법을 이용하여 평판 시험편에 도입한 표면결함과 이면결함을 평가하였다. 표면결함의 경우, 전위차 분포는 결함의 경사도에 따라 변화하고, 결함부와 결함단부의 전위차는 결함의 경사도 및 깊이에 따라 변화한다. 이면결함의 경우, 전위차 분포는 표면결함의 전위차 분포와 구분이 되며, 결함부에서의 전위차는 결함의 깊이에 따라 변화한다.

Keywords