Panel Zone Behavior of Steel Box Connections

Box단면 접합부의 Panel Zone 거동특성

  • Received : 1997.11.28
  • Published : 1997.12.30

Abstract

This paper presents the shear behavior of panel zone in steel frame piers. The results of loading tests on twenty box connections and three types of analysis model are reported herein. It is indicate that the major cause of the reduction of strength and shear deformation capacity (ductility) is the sectional-area ratio and the shear buckling of panel zone. Based on the results, some new proposals are presented for the evalution of strength and ductility of panel zone. This paper is also discussed the ductility of connections by current design procedure.

본 연구는 강제 라멘교각 접합부 panel zone의 전단거동특성에 대하여 검토한 것이다. 여기에서는 접합부 시험체 20개에 대한 재하실험 결과와 3가지의 FEM해석 모델에 대한 결과를 제시 하였다. 이와같은 실험및 해석결과를 비교 검토한 결과, panel zone의 강도와 변형 성능은 단면적비와 전단좌굴등에 의하여 감소하는 경향을 보이고 있음을 알 수 있었다. 따라서 본 연구에서는 이상의 결과를 기초로 panel zone의 강도와 변형성능에 대한 새로운 평가식을 제안하였으며, 또한 기존의 라멘교각 접합부에 대한 변형성능에 관해서 검토하였다.

Keywords

Acknowledgement

Supported by : 인하대학교

References

  1. 日本構造工學論文集 v.33A 鋼製う一メン隅角部の崩壞性狀と變形性能に關する實驗的硏究 中井;事口
  2. 한국 강조학회 논문집 v.6 no.3 box단면 접합부의 강도와 전단변형특성에 관한 실험적연구(I),(II) 황원섭;西村
  3. 日本土木學會論文集 v.244 殘留應力と初期たわみを有する壓縮板の彈塑惟解析 小松;北田
  4. Welding J. v.30 Connection for welded continuous Potal Frames Beedle, L.S.;Popov, E.P.
  5. 日本土木學會論文集 no.455 せん斷おくれ强度を考慮した鋼製う一メン隅角部の限界狀態設計法について 中井;酒造;橋本
  6. 日本科學硏究費補助金硏究成果報告集 鋼骨組構造物の極限强度の統一評慣に關する綜合的硏究 福本
  7. 鋼製う一メン橋脚隅角部の彈塑性擧動と限界狀態設計法に關する硏究 黃元燮
  8. 日本科學硏究費補助金硏究成果報告集 構造物の機能向上からみた高張力の實用化に關する硏究 福本
  9. Welding J. v.50 no.7 Shear in Steel Beam-to-Column Connections Fielding, D.J.;Huang, J.S.
  10. ASCE v.101 no.ST11 Shear Behavior of Steel Frame Joints Krawinkler, H.;Bertreto, V.V.;Popov, E.P.
  11. ASCE no.ST7 Strength of plate Girders in Shear Basler, K.
  12. 日本土木學會論文集 no.153 薄板構造う一メン隅角部の應力計算について 奧村;石澤
  13. 鋼構造物設計基準 阪神高速道路公團
  14. 鋼製橋脚の實績照査報告 阪神高速道路公團
  15. 橋粱と基礎 v.16 鋼製う一メン橋脚實績照査 中井;河井;北田;酒造