Journal of Welding and Joining

The Korean Welding and Joining Society (대한용접접합학회)
권호 표지

Effect of $O_2$ and Al Coantent on the Weld Penetration

STS 강의 $O_2$ 및 Al함량이 용접용입량에 미치는 영향

  • 김희봉 (한양대학교, 금속공학과) ;
  • 김정호 (한양대학교, 금속공학과) ;
  • 이창희 (한양대학교, 금속공학과)
  • Published : 1997.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

The effect of $O_2$and Al contents and the variation of welding parameters such as arc currents, welding speed on the weld penetration was investigated. Examination of weld penetration using GTAW was accomplished in the ferritic STS410L and austenitic STS304. Good penetration could be controlled by the variation of $O_2$ and Al contents in STS304. However, influences of $O_2$ and Al contents on the ferritic STS410L are far less than those on the austenitic STS304. Welding parameters should be considered first before controlling $O_2$ and Al contents for a good penetration in ferritic STS410L. In the simulation study under the stationary heat sources, the results of simulation and experiment have a similar tendency.

Keywords

References

  1. Welding J. GTA Weldability Studies on High Manganese Stainless Steel W. S. Bennett;G. S. Mills
  2. TWI Conference proceeding The Effect of Trace Elements on TIG Weld Penetration C. R. Heiple;P. Burgardt
  3. Welding J. Mechanism for Minor Elements Effect on GTA Fusion Zone Geometry C. R. Heiple;J. R. Roper
  4. Welding J. Capillarity Effects in the GTA Weld Penetration of 21-6-9 Stainless Steel J. R. Roper; D. L. Olson
  5. International Materials Reviews v.35 no.4 Factors Affecting Variables Weld Penetration K. C. Mills;B. J. Keene
  6. Welding J. Effect of Bismuth on Weld Joint Penetration in Austenitic Stainless Steel Y. Takeuchi;R. Takagi;T. Shinoda
  7. Welding J. Effect of Selenium on GTAW Fusion Zone Geometry C. R. Heiple;J. R. Roper
  8. General Electric Tech(86SRD013) Minor Element Effects on GTA Weld Penetration - Weld Pool Pysics R. E. Sundell;H. D. Solomon;S. M. Correa
  9. Welding J. The Effects of Minor Elements on the Welding Characteristics of Stainless Steel B. Pollard
  10. Met. Trans. v.20B no.10 Three-Dimensional Transient Model for Arc Welding Process T. Zacharia;A. H. Eraslan;D. K. Aidun;S. A. David
  11. Met. Trans. v.19B no.6 Surface Tension of Binary Metal Surface Active Solute Systems under Conditions Relevant to Welding Metallurgy P. Sahoo;T. Debroy;M. J. Mcnallan
  12. Welding J. Weld Pool Development during GTA and Laser Beam Welding of Type 304 Stainless Steel, Part I - Theoritical Analysis T. Zacharia;S. A. David;J. M. Vitek;T. Debroy
  13. Met. Trans. v.22B no.4 Computational Modeling of Stationary Gas Tungsten Arc Weld Pools and comparison to Stainless Steel 304 Experimental Results T. Zacharia(et. al.)