Management and control of fieldbus network traffic by bandwidth allocation scheme

대역폭 할당 기법에 의한 필드버스 네트워크의 트래픽 관리 및 제어

  • Hong, Seung-Ho (Dept. of Control and Instrumentation Engineering, Hanyang University)
  • 홍승호 (한양대학교 제어계측공학과)
  • Published : 1997.02.01

Abstract

Fieldbus is the lowest level communication network in factory automation and process control systems. Performance of factory automation and process control systems is directly affected by the data delay induced by network traffic. Data generated from several distributed field devices can be largely divided into three categories: sporadic real-time, periodic real-time and non real-time data. Since these data share one fieldbus network medium, the limited bandwidth of a fieldbus network must be appropriately allocated to the sporadic real-time, periodic real-time and non real-time traffic. This paper introduces a new fieldbus design scheme which allocates the limited bandwidth of fieldbus network to several different kinds of traffic. The design scheme introduced in this study not only satisfies the performance requirements of application systems interconnected into the fieldbus but also fully utilizes the network resources. The design scheme introduced in this study can be applicable to cyclic service protocols operated under single-service discipline. The bandwidth allocation scheme introduced in this study is verified using a discrete-event/continuous-time simulation experiment.

Keywords

References

  1. Computer Integrated Manufacturing v.Ⅰ-Ⅳ R. U. Ayres
  2. Computer-Integrated Design and Manufacturing D. D. Bedworth(et al.)
  3. Communication Networks for Manufacturing J. R. Piementel
  4. Computer Systems for automation and Control G. Olsson;G. Piani
  5. MAP and TOP Communications: Standards and Applications A. Valenzano(et al.)
  6. IEEE Network v.2 no.3 Time-critical communication networks: field buses P. Pleinevanx;J. D. Decognie
  7. 제어 · 자동화 · 시스템공학회지 v.2 no.4 분산제어 및 자동화 시스템과 필드버스 홍숭호;김기암;김지용;고성준
  8. 대한기계학회지 v.3 no.5 MAP : 공장자동화를 위한 네트?p의 표준 홍승호
  9. MAP 3.0 Specification 1993 Release World Federation of MAP/TOP Users Groups
  10. Mini-MAP '93 A. H. McMillan;C. J. Gardner
  11. IEEE Trans. Industrial Electron. v.40 no.3 Optimization of acyclic bandwidth allocation exploiting the priority mechanism in the fieldbus data link layer S. Cavalieri;A. Di Stefano;O. Mirabella
  12. ISA-dS50.02. Draft Standard: Fieldbus Standard for Use in Industrial Control Systems. part 4: Data Link Protocol Specification
  13. IEEE Trans. on Control Systems Technology v.3 no.2 Scheduling Algorithm of data sampling times in the integrated communication and control systems S. H. Hong
  14. MIL-STD-1553B Protocol Manual United States Government Printing Office
  15. FIP Club Functional Specifications Club FIP
  16. DKE/DIN Trial Use Standard (DIN 19245/V) Profibus(Version 4.0) DKE;DIN
  17. Serial Networked Field Instrumentation J. R. Jordan
  18. Aerospace Standard AS4074.1 Linear Token Passing Multiplex Data Bus SAE
  19. Trans. of the Society for Computer Simulation v.5 no.1 Discrete-event/continuous-time simulation of distributed data communication and control systems A. Ray;S. H. Hong;S. Lee;P. J. Egubelu
  20. ASME J. Dyn., Meas. & Cont. v.110 Integrated communication and control systems: part Ⅰ analysis and part Ⅱ design considerations A. Ray;Y. Halevi
  21. IEEE Trans. on Automatic Control v.33 no.1 Stability conditions for multiqueue systems with cyclic service O. C. Ibe;X. Cheng
  22. IEEE Trans. on Robotics and Automation v.12 no.3 Design and evaluation of real-time communication for fieldbus-based manufacturing systems K. G. Shin;C. Chou
  23. Open Bus System '93 Fieldbus MAC mechanisms for hard real time data communication support F. Vasques;G. Juanole
  24. Introduction to Simulation Using SIMAN C. D. Pegden;R. E. Shannon;R. P. Sadowski