Preparation of Silica Glasses via Sintering of Aerogels

에어로겔의 소결에 의한 실리카 유리의 제조

  • 김동준 (연세대학교 세라믹공학과) ;
  • 현상훈 (연세대학교 세라믹공학과)
  • Published : 1997.04.01

Abstract

A fast process for producing pure silica glasses with the reproducibility of 100% by means of sintering of silica aerogels was optimized. The density of silica glasses synthesized by heat-treating upto 110$0^{\circ}C$ with the heating rate of 0.1$^{\circ}C$/min was 2.197 g/㎤. Synthetic silica glasses(5 mm thickness) exhibited the transmittance of 92% in the near IR range as well as they had the excellent mechanical properties such as flexural strength of 162 MPa and hardness of 778 kg/$\textrm{mm}^2$.

Keywords

References

  1. Ultrastructure Processing of Ceramics, Glasses and Composites Behavior of Monolithic Silica Aerogels at Temperatures above 1000℃ J. Phalippou;T. Woignier;J. Zarzycki;L.L. Hench(ed.);D.R. Ulrich(ed.)
  2. Springer Proceeding in Physics v.6 Aerogels J. Fricke(ed.)
  3. J. Non-Cryst. Solids v.82 Preparation of Dried Monolithic SiO₂Gel Bodies by an Autoclave Process J.G. van Lerop;A. Huizing;W.C.P.M. Meerman;C.A.M. Milder
  4. J. Mater. Sci. v.25 Glasses from Acrogels;The Synthesis of Monolithic Silica Aerogels J. Phalippou;T. Woignier;M. Prassas
  5. J. Mater. Sci. v.29 Effect of Solvents and Catalysis on Monolithicity and Physical Properties of Ailica Aerogels A.V. Rao;G.M. Pajonk;N.N. Parvathy
  6. J. Mater. Sci. v.25 Glasses from Aeogels;The Aerogel-Glass Transformation T. Woignier ;J. Phalippoi;M. Prassas
  7. J. Korean Ceram. Soc. v.33 no.5 Low Pressure Synthesis of Silica Aerogels by Supercritical Drying Dong-Joon Kim;Sang-Hoon Hyun
  8. Ph.D. Thesis,Yonsei University Synthesis of Silica Aerogels by the Isopropanol-Sipercritical Drying Technique and Effects of Heat-treatment on Their Properties Dong-Joon Kim
  9. J. Non-Cryst. Solids. v.125 Isothermal Sintering of SiO₂-Aerogels A. Emmering;J. Gross;R. Gerlach;R. Goswm
  10. Handbook of Glass Manufacture F.T. Tooley(ed.)