Effect of Molar Ratio of $Fe_2O_3$ and BaO Addition on the Characteristics of Sr-Ferrite

$Fe_2O_3$몰비 및 B\ulcorner첨가가 Sr-Ferrite 특성에 미치는 영향

  • 문기훈 (경상대학교 공과대학 무기재료공학과, 생산기술연구소) ;
  • 심영재 (경상대학교 공과대학 무기재료공학과, 생산기술연구소) ;
  • 조성걸 (경상대학교 공과대학 전자재료공학과, 생산기술연구소)
  • Published : 1997.05.01

Abstract

Sr-ferrite having magnetoplumbite structure is similar to Ba-ferrite in magnetic characteristics, but better magnetic characteristics for using motor application. To improve remanence magnetic flux density(Br) and coercive force(iHc), it is necessary that sintered ferrites must have high density and grain size less than 1 $\mu$m. By varying n values in SrO.nFe2O3 basic composition, calcination temperature, and BaO addition, Sr-ferrite powder and sintered specimen was prepared. The n values, calcination temperature, and BaO addition affected secondary phase formation, particle size, and particle shape. BaO addition enhanced Fe2O3 secondary phase and hexagonal shape particle. Fe2O3 phase reduced sintered density which greatly decreased Br.

Keywords

References

  1. J. Am. Cer. Bull. v.47 no.2 Magnetic ceramic-a Review and status Report F. G. Brockman
  2. J. Magnetism and Magnetic Materials v.101 High Coercivity Sr hexaferrites S. Besenicar;M. Drofenik
  3. Ber. Dtsch. Keram. Ges. v.55 no.6 Effect of silica during sintering of M-type ferrite Franciscus Kools
  4. 대한금속학회지 v.33 no.1 수열합성법에 의해 제조된 Sr-ferrite분말의 자기적 특성 이종현;이혁희;원창환
  5. J. Appl. Phys. v.69 no.8 Substrate effects on the crystalline orientation of barium hexaferrite films E. Lacroix;P. Gerard;G. Marest;M. Dupuy
  6. 상공부 공업기반 개발사업 기술 1차년도 보고서 B, 4100G, H 4100Oe이상의 고특성 Sr자석 기술개발에 관한 연구 정원용
  7. Phase Diagrams for Ceramics v.1 Robert S. Roth;Jennifer R. Dennis;Howard F. Mcmurdie
  8. IEEE Transactions on Magnetics v.MAG-12 no.6 The Formation of Strontium Hexaferrite $SrFe_{12}O_{19}$ from Pure Iron Oxide and Strontium Cerbonate F. Haberey;A. Kocked
  9. J. Am. Cer. Soc. v.56 no.4 Characterization and Sintering Behavior of Ba and Sr Ferrite J. S. Rced;R. M. Fulrath