Journal of the Korean Ceramic Society (한국세라믹학회지)

The Korean Ceramic Society (한국세라믹학회)
권호 표지

Effect of Al Amount on the Sintering Behavior and Mechanical Properties of Reaction Bonded Alumina

반응 소결 Alumina의 소결거동과 기계적 성질에 미치는 Al 첨가량의 영향

  • 장복기 (전남대학교 무기재료공학과) ;
  • 문종하 (전남대학교 무기재료공학과) ;
  • 이종호 (전남대학교 무기재료공학과)
  • Published : 1997.05.01
Download PDF
⟨ Previous Next ⟩

Abstract

The effect of Al content and heating rate on the sintering behavior, microstructure, and mechanical properties of reaction bonded alumina (RBAO) was investigated. As the heating rate became slower a critical Al content which could be added to RBAO increased. The weight gain and linear shrinkage of RBAO containing of 55 vol% Al were 28% and 6.5%, respectively. The relative density of RBAO decreased from 96 to 94%, as the amount of Al increased from 15 to 55 vol%. The hardness of RBAO increased from 17.8 to 19.9 GPa and the bending strength enhanced from 370 to 570 MPa, as the amount of Al increased from 15 to 55 vol%. On the other hand, the wear rate of RBAO degraded from 6.7 to 3.39$\times$10-5 $\textrm{mm}^2$/kg and the fracture toughness decreased from 4.1 to 3.6 MPa.m1/2, as the amount of Al increased from 15 to 55 vol%. Fracture modes were shown to the mixed mode of inter/transgranular. However, transgranular fracture was dominant with increasing the content of Al.

Keywords

References

  1. Special Ceramic v.1 no.24 The Silicon Nitride and Sialon Families of Structual Ceramics M. L. Torti
  2. Am. Ceram. Soc. Bull. v.66 no.2 Ni₃N₄-SiC Composites S. T. Buljan;J. G. Baldorm;M. L. Huckabee
  3. Ceram. Eng. Sci. Proc. v.9 no.7-8 The Nitridation of High purity, Laser-Synthesized Silicon Powder to form Reaction Bonded Silicon Nitride B. W. Sheldon;J. S. Haggerty
  4. J. Mater. Sci. v.14 no.1017-1051 Reaction-Bonded Silicon Nitride: Its Formation and Properties A. J. Moulson
  5. Ceramic Transactions Vol.I, Ceramic Powder Science II-B v.1 no.II-B Properties of Reaction Bonded Silicon Nitride made from High Purity Silicon Powder J. S. Haggerty;A. Lightfoot;J. E. Ritter;S. V. Nair;P. Gennari
  6. Am. Ceram. Soc. Bull. v.68 no.2 Reaction-Based Processing Methods for Ceramic-Matrix Composites Y. M. Chiang;J. S. Haggerty;R. P. Messner;C. Demetry
  7. Am. Ceram. Soc. Bull. v.54 no.12 Silicon/Silicon Carbide Composite W. B. Hillig;R. L. Mehan;C. R. Morelock;V. J. Decarlo;W. Laskow
  8. J. Am. Ceram. Soc. v.60 no.3-4 High Temperature Time Dependent Strength of an Si/SiC Composites G. G. Trantina;R. L. Mehan
  9. J. Mater. Sci. v.13 no.358-366 Effect of SiC Content and Orientation on the Properties of Si/SiC Ceramic Composite R. L. Mehan
  10. J. Am. Ceram. Soc. v.68 no.143-146 Time Dependant Strength of Siliconized Silicon Carbide under Stress at 1000℃ and 1100℃ D. F. Carroll;R. E. Tressler
  11. J. Mater. Sci. Lett. v.13 no.293-296 Microstructure and Properties of AIN matrix Composites Produced by the Directed Nitridation of Molten Aluminum M. K. Aghajanian;J. P. Biel;R. J. Smith;C. R. Kennedy
  12. J. Am. Ceram. Soc. v.73 no.7 Microstructural Evolution During the Infiltration Treatment of Titanium Carbide-Iron Composites K. W. Chae;D. I. Chun;D. Y. Kim
  13. J. Am. Ceram. Soc. v.75 no.3 Densification of Reaction Synthesized Titanium Carbide by High-velocity Forging J. C. Lasalvia;L. W. Meyer;M. H. Meyer
  14. J. Mater. Res. v.1 no.1 Formation of Lanxide Ceramic Composite Materials M. S. Newkirk;A. W. Urquhart;H. R. Zwicker
  15. J. Mater. Sci v.24 no.258-270 Properties and Microstructures of Lanxide Al₂O₃-Al Ceramic Composites Materials M. K. Aghajanian;N. H. Macmillan;C. R. Kennedy;S. J. Luszcz;R. Roy
  16. J. Euro. Ceram. Soc. v.5 no.29-35 Low Shrinkage Reaction-bonded Alumina N. Claussen;T. Le;S. Wu
  17. Ceram. Eng. Sci. Proc. v.11 no.7-8 Tailoring of Reaction-Bonded Al₂O₃(RBAO) Ceramics N. Claussen;N. A. Travitzky;S. Wu
  18. 한국요업학회지 v.29 no.6 저 수축 반응 소결 알루미나 세라믹스의 제조 박정현;이현권;정경원;염강섭
  19. 한국요업학회지 v.31 no.3 산화물과 금속 복합 분말의 Attrition Milling 및 반응소결: I. 분말의 특성에 따른 분쇄거동 황규홍;박정환;윤태경
  20. 한국요업학회지 v.31 no.4 산화물과 금속 복합분말의 Attrition Milling 및 반응소결: II. 분말의 분쇄특성에 따른 반응 소결 거동 황규홍;김의훈
  21. J. Am. Ceram. Soc. v.76 no.4 Mechanisms and Kinetics of Reaction-Bonded Aluminum Oxide Ceramics S. Wu; D. Holz;N. Claussen
  22. J. Euro. Ceram. Soc. v.14 no.97-109 Reaction Bonding of Aluminum Oxide (RBAO) Composites Processing, Reaction mechamism and Properties N. Claussen;S. Wu;D. Holz
  23. J. Am. Ceram. Soc. v.77 no.10 Effect of Processing Parameters on Phase and Microstructure Evolution in RBAO Ceramics D. Holz;S. Wu;S. Scheppokat;N. Claussen
  24. J. Ceram. Soc. Jpn. v.103 no.8 Reaction Bonding of Aluminum Oxide(RBAO)-Science and Technology N. Claussen;R. Janssen;D. Holz
  25. J. Coat Technol. v.54 no.691 Reactivity of Aluminum with Solvent and Additives in Coatings W. L. Archer;V. L. Stenvens
  26. J. Am. Ceram. Soc. v.55 no.2 Lineal Intercept Technique for Measuring Grain size in Two Phase Polycrystalline Ceramics J. C. Wurst;J. A. Nelson
  27. Ceramic Hardness I. J. McColm