Journal of the Korean Ceramic Society (한국세라믹학회지)

The Korean Ceramic Society (한국세라믹학회)
권호 표지

A Study on Synthesis and Characterization of $Ti_xZr_{1-x}C$ Solid-Solution by Self-propagation High Temperature Synthesis Method

SHS법에 의한 $Ti_xZr_{1-x}C$ 고용체의 합성 및 특성 연구

  • Published : 1997.07.01
Download PDF
⟨ Previous Next ⟩

Abstract

TixZr1-xC(0$0^{\circ}C$, 5.1 mm/sec respectively. The relative density, three point flexural strength, and the hardness of composites, which was sintered at 190$0^{\circ}C$ for 60 min by using hot-pressing under a pressure of 30 MPa, were 99%, 525 MPa and 24 GPa respectively.

Keywords

References

  1. Anisotropy in Single Crystal Refractory Compounds v.1 D. L. Harrod;L. R. Fleisher;F. W. Valdiek(ed.);S. A. Mersol(ed.)
  2. J. Am. Ceram. Soc. v.75 no.1 Synthesis, Sintering, Microstructured and Mechanical Properties of Ceramics made by Exothermic Reactions R. A. Cutler;K. M. Rigtrup
  3. Acad. Sci. USSR. Chem. Phys. v.204 Self-Propagating High-Temperature Sythesis of Refractory Inorganic Compounds A. E. Merzhanov;I. P. Brovinkaya
  4. Am. Soc. Mech. Engrs 3rd Symp. Thermophys. Properties, parperers, La Fayctte, Ind., Thermophysical Properties at Extreem Temperature and Pressures Farr J. D.;Witterman W. G;Stone P. L;Westrum E. F., Jr.;S. Gratch(ed.)
  5. Anal. Chem. v.36 no.8 Smoothing and Differentiation of Data by Simplified Least-Squares Procedures A. Savizky;M. J. E. Golay
  6. J. Am. Ceram. Soc. Characterization of the Zr-ZrC System R. V. Sara
  7. Prog. Sol. State Chem. v.6 Transition Metal Carbides Zirconium Cabide System W. S. Williame
  8. MRS Int'l. Mts. on Adv. Mater. v.5 Fabrication of TiB₂-TiC Composite by High Pressure Combustion Sintering C. H. Yo;Y. Miyamoto;Y. Takano;O. Yamada;M. Kizumi
  9. J. Am. Ceram. Soc. v.75 no.1 Temperature Profile Analysis in Combustion Synthesis: I , Theory and Background S. D. Dunmead;Z. A. Munir;J. B. Holt
  10. 엔지니어링 세라믹스 이홍림