버너방식 DPF 시스템에서 가스온도 제어를 통한 입자상물질 연소율제어의 실험적 검증

An Experimental Study on the Control of the Combustion Rate by Temperature Control of Gas Entrained into the Filter in Burner-Type Particulate Trap

  • 박동선 (서울대학교 대학원 기계공학과) ;
  • 김재업 (서울대학교 대학원 기계공학과) ;
  • 조훈 (서울대학교 대학원 기계공학과) ;
  • 김응서 (서울대학교 공과대학 기계공학과)
  • 발행 : 1997.07.01

초록

Work on the reduction of particulate matter(PM) from a diesel vehicl has led to a new trp system and a control method to control the combustion rate of the PM filtrated in the trap, which was named as 'Active Exhaust Feeding Regeneration(AEFR) System' by its operation mechanism. Ceramic cordierite filter is a major component of the trap and susceptible to thermal shock. Therefore the system should be designed to reduce the peak temperature and temperature gradients in the trap ; these have been considered to be the main factors causing thermal shock of the filter during the regeneration. It uses the engine's exhaust gas partially for the regeneration of the ceramic filter. It controlled bypass flow rate of the engine's exhaust gas precisely to control the temperature of the gas entrained into the filter. Gas temperatures were measured inside filter, and the oxygen concentration at the outlet of the filter was also monitored during the regeneration to analyze the combustion process of the PM. The temperature distributions and temperature gradients in the filter during the regeneration varied widely according to the regeneration control schemes. Finally, this system shows relatively low peak temperature and temperature gradients in the filter during its regeneration. It is considered that this system uses a mew method to control the combustion rate of the PM, which is different from the methods used in the previous studies.

키워드

참고문헌

  1. SAE Paper No. 940233 A Review of Diesel Particulate Control Technology and Emission Effects J. H. Johnson;S. T. Bagley;L. D. Gratz;D. G. Leddy
  2. SAE Paper No. 900602 Ways Toward the Clean Heavy -Duty Diesel P. Zelenka;W. Kriegler;P. L. Herzog;W. P. Cartellieri
  3. 환경부 선도기술개발사업 3차년도 연차보고서 자동차 배출가스 저감기술 국립환경연구원
  4. SAE Paper No. 880006 Development of a Particulate Trap system for a Heavy-Duy diesel engine J. S. MacDonald;G. M. Simon
  5. SAE Trans v.94 no.1 High Temperature Fatigue in Ceramic Wall-Flow Diesel Filters S. T. Gulati;J. D. Helfinstine
  6. SAE Trans. v.92 no.1 Thermal Stresses in Ceramic Wall-Flow Diesel Fiters S. T. Gulati
  7. SAE Paper No. 92014 Selection and Development of a Particulate Trap System for Light-Duty Diesel Engine A. D. Tuteja;M. B. Hoffman;J. M. Lopez-Crevillen;S. Singh;R. R. Stomber;G. C. Vallace
  8. 한국자동차 공학회 '95년도 추계학술대회 논문집 v.Ⅱ 디젤 입자상물질 제거 장치의 재생 제어 방식 김재업;박동선;이만복;김응서
  9. 한국자동차 공학회 논문집 v.4 no.3 디젤 입자상물질 제거장치에 적용되는 버너의 설계 개념 및 기초 실험 박동선;김재업;이만복;김응서
  10. SAE Paper No. 880004 Considerations on the Temperature Distribution and Gradient in the Filter During the Regeneration Process in Bumer Type Particulate Trap System D. S. Park;J. U. Kim;B. Y. Hyeon;E. S. Kim
  11. SAE Paper No. 880004 Ceramic Trap Regeneration Rate Control through Bypass Techniques K. N. Pattas
  12. SAE Paper No. 8500012 A New Approach to the Oxidizing Behavior of a Porous Ceramic Diesel Particulate Trap K. N. Pattas;N. a. Kyriakis;Z. C. Samaras
  13. SAE Paper No. 880007 A Thermal Regeneration Model for Monolithic and Fibrous Diesel Particulate Traps C. P. Garner;J. C. Dent
  14. SAE Paper 950366 Trap Protection by Limiting A/F Ratio During Regeneration K. N. Pattas;A. M. Stamatelos;K. N. Kougianos;G. C. Koltsakis;P. K. Pistikopoulos
  15. 한국자동차공학회 v.15 no.3 디젤 자동차의 배기가스 저감 기술 김상환
  16. 한국자동차 공학회 94년도 추계학술대회 논문집 Darcy의 법칙을 잉요한 Diesel Particulate Trap System의 Ceramic Filter의 재생조건 결정밥법 위인혁;윤보승;정인승
  17. 한국자동차 공학회 '94년도 추계학술대회 논문집 첨가제-스토틀링 재생에 의한 디젤 입자상물질 여과장치 성능평가에 관한 연구 조강래;엄명도;유정호
  18. 한국자동차 공학회 '94년도 추계학술대회 논문집 디젤기관에서 스로틀링 방식의 세라믹 필터 트랩에 의한 입자상물질 저감에 관한 실험적 연구 한영출;강호인;최문석