Journal of Ocean Engineering and Technology (한국해양공학회지)

Korean Society of Ocean Engineers (한국해양공학회)
권호 표지

A fracture mechanics evaluation on the fatigue crack propagation at spot welded aluminum joint in passenger car body

스폿용접된 자동차 차체용 알루미늄 박판의 피로균열진전의 파괴역학적 평가

  • 박인덕 (부경대학교, 대학원) ;
  • 남기우 (부경대학교 재료공학과) ;
  • 강석봉 (한국기계연구원 재료기술연구부)
  • Published : 1997.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

The fatigue crack propagation properties and fatigue life of two kinds of Al body panel for automobile were examined experimentally by using the plate specimen and the single spot welding specimen. The fatigue limit of spot welding specimens was lower than that of a plate specimen. The fatigue limit was similar in two kinds of spot welding specimen. The shape and size of crack propagation were observed and measured on beach mark of fracture surface. The crack propagation of surface crack specimen showed almost same tendency to that of a thick plate as almost semi-elliptical. In spot welding specimen, the fatigue crack occurred in inside surface of nugget area was almost semi-elliptical. The crack growth rate can be explained using equation of stress intensity factors.

Keywords

References

  1. 대한기술학회지 v.3 자동차 산업의 신소재 기술 조원석
  2. Advanced Materials & Processes v.137 Norman G. Gjostein
  3. Advanced Materials & Processes v.138 Claus Razim
  4. Proc. of Int. conf. on Recent Advances in Science and Engineering of Light Metals Minimizing the weight of autobody and aluminum sheets S. Ujihara(et al.)
  5. Sumitomo Light Metal Technical Reports v.32 Properties of Aluminum Alloy Sheets for Autobodies H. Yosnida;S. Hirano
  6. 住支輕金屬會報 v.21 馬場義雄 宇野生
  7. Bull. of the korean Inst. of Met. & Mater. v.7 자동차 차체용 알루미늄 합금박판에 대한 관련 기술의 현황과 전망 강석봉;임차용
  8. 自動車車體スポット溶接構造の疲勞强度と壽命推定 (社)自動車技術會
  9. Handbook of Stress Intensity Factors for Researchers and Engineers H. Tada;P. Paris;G. Irwin
  10. Engineering Fracture Mechanics v.15 An Empirical Stress-Intensity Factory Equation for the Surface Crack J. C. Newman, Jr.;I. S. Raju
  11. JSME Int. J. v.30 The fatigue life and crack through thickness behavior of a surface-cracked plate(for the case of tensile load) K. Ando;S. Fujibayashi;K. W. Nam;M. Takahashi;N. Ogura
  12. Proceeding of JSME v.28 A fracture mechanics study on the fatigue crack growth at the spot on weld joint C. Z. Li;K. Ohkura;K. Haranaka;M. Shinozaki;H. Kitagawa
  13. 輕金屬鎔接 v.31 自動車用アルミニウム合金の接合(1) 難波圭三
  14. ASME, J. of Basic Engineering v.85 Critical analysis of crack propagation laws P. Paris;F. Erdogan
  15. Fatigue Fract. Engng. Mater. Struct. v.16 The effect of specimen size on the behaviour of penetrating fatigue crack K. W. Nam;K. Ando;N. Ogura
  16. Fatigue Fract. Engng. Mater. Struct. v.18 Fatigue life and surface crack penetrating behaviour and aluminum alloy K. W. Nam;K. Iwase;K. Ando
  17. 橫浜國立大學學位論文 薄板接合構造物の破壞力學の適用に關する基礎的硏究 李春植
  18. 薄鋼板スポット溶接構造の强度と剛性に關する基礎的硏究 藤本正男
  19. J. Sec. of Naval Architects J. v.137 Apreliminary study on surface crack growth in a combined tensile and bending fatigue process M. Kawahara;M. Kurihara