PHEMT를 이용한 750MHz CATV증폭 모듈 개발

Development of 750MHz CATV amplifier module using PHEMTs

  • 유주형 (인천대학교 공과대학 전자공학과) ;
  • 구경헌 (인천대학교 공과대학 전자공학과) ;
  • 조삼열 (마이크로통신 주식회사)
  • 발행 : 1997.01.01

초록

알루미나 기판에 PHEMT 칩을 이용하여 750MHz CATV 증폭모듈을 설계 및 제작하였다. 와이어 본딩된 PHEMT 칩을 이용하여 개발된 2단 푸쉬풀 증폭기는 50~750MHz 대역에서 19dB 이득, 15dB 이상의 입출력 반사손실 4.2dB 이하의 잡음지수 특성을 나타내었다. 이 결과는 상용의 750MHz 증폭기모듈의 특성보다 우수하다. 본 논문에서는 증폭기 설계, 회로 구성 및 측정 결과 등을 제시하였다.

A 750 MHz CATV amplifier module has been designed and fabricated using PHEMT chips on alumina board. Developed 2-stage push-pull amplifier using wire bounded PHEMT chips shows 19dB gain, 15dB return loss and 4. 2dB noise figure over 50-750MHz frequency range. These results are superior to the characteristics of the commer-cially abailable 750MHz amplifier module. In this paper, brief background of the amplifier design, the circuit diagram and the test result have been presented.

키워드

참고문헌

  1. CATV용 광대역 하이브리드 전력증폭기 모듈 설계에 관한 연구 전자부품종합기술연구소
  2. CATV 증폭기 성능 평가 방법 연구 전자부품종합기술연구소
  3. CATV 시험평가 기술개발 및 측정절차에 관한 연구 전자부품종합기술연구소
  4. CATV용 광대역 Hybrid Amp 기술개발에 관한 연구 통상산업부
  5. CATV용 광대역 하이브리드 전력증폭기 모듈의 설계 및 제작에 관한 연구 국민대학교
  6. ONU 및 OTU/ORU RF 증폭회로부 구현 및 설계방안 제시 인천대학교
  7. RF Design Guide Peter Vizmuller
  8. Balun Transformer Toko
  9. Data Handbook SC16 Wideband Hybrid IC Modules Philips
  10. RF Device Data Motorola
  11. IEEE MTTS Digest High Efficiency 40Watt PsHEMT S-Band MIC power amplifiers S. Bouthllette(et al)
  12. IEEE MTT-S Digest Power PHEMT module delivers 4Watts, 38% P.A.E. over the 18.0 to 21.2 GHz band Bernard Kraemer(et al)
  13. Transmission Line Transformers Jerry Sevick
  14. RF Circuit Design Chris Bowick
  15. RF and Microwave Circuit Design for Wireless Communications Lawrence E Larson
  16. NCTA Recommended Practices for Measurements on Cable Television Systems National Cable Television Association(NCTA)