Transactions of the Korean Society of Mechanical Engineers B (대한기계학회논문집B)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

축류회전차 익말단 틈새유동에 대한 수치해석

  • Published : 1998.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

The substantial loss behind axial flow rotor was generated by wake, various vortices in the hub region and the leakage vortex in the tip region. Particularly, the leakage vortex formed near blade tip was one of the main causes of the reduction of performance, the generation of noise and the aerodynamic vibration in rotor downstream. In this study, the three-dimensional flowfields in an axial flow rotor for various tip clearances were calculated, and the numerical results were compared with the experimental ones. The numerical technique was based on SIMPLE algorithm using standard k-.epsilon. model (WFM). Through calculations, the effects of the tip clearance on the overall performance of rotor and the loss distributions, and the increase in the displacement, momentum, and blade-force-deficit thickness of the casing wall boundary layer were investigated. The mass-averaged flow variables behind rotor agreed well with the experimental results. The presence of the tip leakage vortex behind rotor was described well. Although the loci of leakage vortex by calculation showed some differences compared with the experimental results, its behavior for various tip clearances was clarified by examining the loci of vortex center.

Keywords

References

  1. ASME J. of Engineering for Power v.104 Lakshminarayana, B.;Pouagare, M.;Davino, R.
  2. ASME J. of Engineering for Power v.104 Lakshminarayana, B.;Davino, R.;Pouagare, M.
  3. ASME J. of Engineering for Power v.108 Inoue, M.;Kuroumaru, M.;Fukuhara, M.
  4. ASME J. of Turbomachinery v.111 Inoue, M.;Kuroumaru, M.
  5. The 2nd DSME-JSME Fluids Engineering Conference v.2 Cho, K. R.;Kang, D. J.;Cho, S. O.
  6. FLOMEKO 93 v.2 Cho, K. R.;Chung, W. J.
  7. J. of Engineering for Gas Turbines and Power v.108 Hah, C.
  8. ASME J. of Turbomachinery v.115 Kunz, R. F.;Lakshminarayana, B.'Basson A. H.
  9. ASME J. of Turbomachinery v.118 Copenhaver, W. W.;Mayhew, E. R.;Hah, C.;Wadia, A. R.
  10. 대한기계학회 '94년도 추계학술대회논문집(II) 노수혁;조강래
  11. 대한기계학회논문집(B) v.21 no.7 노수혁;조강래
  12. 대한기계학회논문집(B) v.20 no.10 김성원;조강래
  13. Numerical Heat Transfer and Fluid Flow Patankar, S. V.
  14. Ph. D Thesis, University of London A Finite Volume Method for the Prediction of Three Dimensional Fluid Flow in Complex Ducts Peric, M.
  15. 연세대학교 기계공학과 박사학위논문 방영석
  16. ASME J. of Turbomachinery v.113 Chen, G. T.;Greitzer, E. M.;Tan, C. S.;Marble, F. E.
  17. ASME J. of Basic Engineering Lakshminarayana, B.
  18. ASME J. of Engineering for Power v.104 Hunter, I. H.;Cumsty, N. A.