Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Effects of Aspect and Area Ratio of Fiber on the Accuracy of Intensity Method in Measurement of Fiber Orientation-Angle Distribution

섬유배향각 분포측정에 있어서 농도법의 정밀도에 미치는 섬유종횡비와 면적비의 영향

  • Lee, S.D. (Dept.of Precision Mechanical Engineering, Graduate School of Chosun University) ;
  • Kim, H. (Dept.of Precision Mechanical Engineering, Graduate School of Chosun University) ;
  • Lee, D.G. (Dept.of Mechanical Engineering, Chosun University) ;
  • Han, G.Y. (Dept.of Mechanical Engineering, Chosun University) ;
  • Kim, E.G. (School of Mechanical engineering, Kookmin University)
  • 이상동 (조선대학교 대학원 정밀기계공학과) ;
  • 김혁 (조선대학교 대학원 정밀기계공학과) ;
  • 이동기 (조선대학교 기계공학부) ;
  • 한길영 (조선대학교 기계공학부) ;
  • 김이곤 (국민대학교 기계공학부)
  • Published : 1998.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

To investigate accuracy of intensity method for measurement of the fiber orientation distribution, fiber orientation function is calculated by drawing simulation figures for the fiber orientation as varying fiber aspect ratio, fiber area ratio, and fiber orientation state, respectively. The values of fiber orientation function measured by intensity method are compared with the calculated values of fiber orientation function. The results show that measurement accuracy of the fiber orientation angle distribution by intensity method is affected by the fiber aspect ratio when the total length of oriented fiber is same. The average gradient of fiber orientation function is 0.94 for 1000mm of the total fiber length and is 0.93 for 2000 mm when the fiber aspect ratio is over 50. Measurement accuracy by intensity method is about 94% and the reliable data can be obtained by intensity method.

Keywords