Abstract
The NTC thermistors were sintered by using microwave hybrid heating method at $1100^{\circ}C$~$1300^{\circ}C$ and those electrical properties were investigated. The obtained $B_{25^{\circ}C/85^{\circ}C}$ values from temperature dependence of electrical resisitivity were around 3100~3200 K which were almost the same values as conventionally sintered ones. Compared with conventional sintering process, this process could complete whole sintering process within 20 minutes. This the processing time and energy consumption could be reduced through this rapid heating by using microwave hybrid heating.t there were showed only two peaks, glycolide melting peak and lower molecular weight melting peak without lauryl alcohol. Conversion increased slowly with the reaction time up to 50 minutes, and then gave a sudden increase above that. The reaction time to disappear in glycolide melting peak during polymerization was shortened with the increase of lauryl alcohol content. Zero-shear viscosity of polyglycolic acid decreased with the increase of free acid content in glycolide.ssional energy and bending hysteresis increased. \circled3 Surface characteristics such as friction coefficient and thickness variation of highly shrinkage fabrics became relatively roughened state. \circled4 Since stiffened and roughened characteristics of highly shrinkage fabrics, drapabilities of them were significantly lowered. Additionally thermal insulation property of high shrinkage fabric was higher than that of low shrinkage fabric due to bulky and thickened feature. From the results, it is considered that the silk fabrics with high filling shrinkage have the good bulkiness and heat keeping properties and thus they have the suitable characteristics for high quality men's and women's formal garments.
마이크로파(2.45GHz) 에너지를 이용한 소결법으로 $1100^{\circ}C$~$1300^{\circ}C$의 온도범위에서 반도체 세라믹스인 $Mn_3O_4{\cdot}Co_3O_4{\cdot}3NiO$ 조성의 NTC 서미스터를 소결하였으며, 그 전기적 특성을 조사하였다. 소결온도가 높아질수록 소결밀도가 높은 치밀한 소결체를 얻을 수 있었으며, 25~$85^{\circ}C$ 범위의 온도변화에 따른 전기저항변화 특성으로부터 구한 비저항 $B_{25^{\circ/85^{\circ}}$ 정수는 3100~3200K이었다. 마이크로파 하이브리드, 소결법으로 소결된 시편과 일반소결법으로 소결된 시편을 비교하면 소결특성과 전기적물성에서 비슷한 결과를 얻을 수 있었다. 마이크로파 에너지를 이용한 소결공정은 20분 안에 완료되는 짧은 시간의 급속소결법으로 공정 시간과 에너지를 크게 절감할 수 있었다.