Journal of Advanced Marine Engineering and Technology

  • 제22권3호
  • /
  • Pages.303-310
  • /
  • 1998
  • /
  • 2234-7925(pISSN)
  • /
  • 2234-8352(eISSN)
한국마린엔지니어링학회 (The Korean Society of Marine Engineering)
권호 표지

평행평판내 비대칭 난류유동과 열전달의 예측

Prediction of Asymmetric Turbulent Fluid Flow and Heat Transfer in the Parallel Plates

  • 오세경 (경상대학교 기관공학과 해양산업연구소)
  • 발행 : 1998.05.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

We report on the analytical results of examination of fully developed asymmetric flow and heat transfer between parallel plane plates. The asymmetry was introduced by roughening one of the plane while the other was left smooth. The integral method together with a turbulence model based on modified Prandtl's mixing length theory for the rough was used to determine the velocity distribution and friction. The temperature distrtibution is then predicted and heat transfer coefficients are calculated. The present paper shows that the heat transfer increases more than the friction factor for a given roughness structure. Generally the results show the strong effect of asymmetry on engineering parameters. Furthermore it is the roughness structure which influences the nature of asymmetry and heat transfer.

키워드

참고문헌

  1. Paper No. 1, Int. Heat Transfer Conference Forced Convection Heat Transfer from Surfaces Roughened by Traverse Ribs Wilkie, D.
  2. 대한기계학회논문집 v.17-5 사각돌출형 표면 거칠기가 있는 이중동심관내의 난류유동과 열전달 안수환;이윤표;김경천
  3. International Communications in Heat and Mass Transfer Fully Developed Fluid Flow and Heat Transfer in rough Annuli Ahn, S. W.;Kim, K. C.
  4. J. of Fluid Mechanics v.51-2 Fully Developed Asymmetric Flow in a Plane Channel Hanjalic, K.;Launder, B. E.
  5. J. of Fluids Engineering v.116 Friction Factor for Flow in Rectangular Ducts with One side Rib Roughened Youn, B.;Yuen, C.;Mills, A. F.
  6. NACA TM -1292 Laws of Flow in Rough Pipes Nukuradse, J.
  7. Int. J. Heat Mass Transfer v.10 Friction Factor Measurements in a Rectangular Channel with Walls of Identical and Nonidentical Roughness Wilkie, D.;Cowin, M.;Burnett, P.;Burgoyne, T.
  8. ZAMM v.31 Vollstandigo Darstellung der Turbulenten Geschwindigkeitsverteilung in Glatten Leitungen Reichardt, H.
  9. Int. J. of Heat & Mass Transfer v.11 Turbulent Heat Tansfer from the Core in Thermal entrance Region of Concentric Annuli Lee, Y.
  10. NACA TM-1231 Prandtl. L.
  11. Master of App. Sci. An asymmetric Turbulent Fluid Flow induced by Rectangular Ribbed Surface Roughness Bhuiyan, A.
  12. J. Heat Transfer v.84C A Comparison of Predicted and Measured Friction Factors for Turbulent Flow through Rectangular Ducts Hartnett, J. P.;Koh, J. C. Y.
  13. Master of App. Sci. Turbulent Fluid Flow and Heat Transfer Induced by Square-Ribbed Surface Roughness in Concentric Annuli Ahn, S. W.