Journal of Advanced Marine Engineering and Technology

The Korean Society of Marine Engineering (한국마린엔지니어링학회)
권호 표지

Turbulent Flow Characteristics using Plane Jet on Impingement Surface

평면제트를 이용한 충돌면에서의 난류유동 특성

  • 윤순현 (부산대학교 기계공학과 , 기계기술연구소)
  • Published : 1998.07.01
Download PDF
⟨ Previous Next ⟩

Abstract

Experiments were conducted to investigate the turbulent flow characteristics from on oblique impingement surface to an plane jet at the jet Reynolds number(Re based on the nozzle width) $3{\times}10^4$ The jet mean velocity and turbulent intensity profiles have been measured along the impingement surface by hot-wire anemometer. The nozzle-to-plate distance(H/B) ranged from 2 to 10 and the oblique angle (a) from 45 to 90 degree. Also the secondary peak of the turbulent intensity was observed at H/B=4 S/B 5 and a=90 degree. It has been found that the stagnation point shifted toward the minor flow region as the oblique angle decreased and the position of the stagnation point nearly coincided with that of the maximum turbulent intensity.

Keywords

References

  1. Stanford Univ. Tech. Rep. v.3 The Flow Development and Heat Transfer Characteristics of Plane Turbulent Impinging Jets Schauer, J. J.;Eustis, R. H.
  2. J. of Hydraulics Div. ASCE v.100 Impinging Circular Turbulent Jets Beltaos, S.;Rajaratnam, N.
  3. J. of Fluid Mech. v.73 The Planar Turbulent Jet Gutmark, E.;Wyananske, J.
  4. J. of Fluid Mech. v.88 The Plane Turbulent Impinging Jet Gutmark, E.;Wolfshtein, M.;Wygnanski, I.
  5. Bulletin of the JSME v.26 no.221 Turbulent Effect on the Impinging Jet on a Flat Plate Amano, R. S.
  6. Trans. of ASME, J. of Basic Eng. v.92 Some Solutions of the Plane Turbulent Impinging Jet Wolfshtein, M.
  7. ASME, J. of Heat Transfer v.88 Heat Transfer Characteristics of Impinging Two Dimensional Air Jets Gardon, R.;Akfirat, J. C.
  8. ASME J. of Heat Transfer v.111 Heat Transfer Measurements from a Surface with Uniform Heat Flux and a fully Developed Impinging Jet Baughn, J. W.;Shimizu, S. S.
  9. ASME J. of Heat Transfer v.110 Heat Transfer From a Flat Surface to an Oblique Impinging Jet Goldstein, R. J.;Franchett, M. E.
  10. ASME J. of Heat Transfer v.102 Heat Transfer Characteristics of an Obliquely Impinging Wall Jet Sparrow, E.;Lovell, B. J.
  11. J. Heat and Fluid Flow v.13 A Review of Heat Transfer Data for Single Circular Jet Impingement Jambunathan, K.;Lai, E.;Moss, M. A.;Button, B. L.
  12. International Developments in Heat Transfer Heat Transfer Between a Flat Plate and Jets of Air Impinging on It Gardon, R.;Cobonpue, J.
  13. Int. J. Heat Transfer v.8 The Role of Turbulence in Determining the Heat-Transfer Characteristics of Impinging Jets Gardon, R.;J. C. Akfirat