Flow Analysis with a Port/Valve Assembly and Cylinder Using a RNG k-$\varepsilon$ Model

RNG k-$\varepsilon$모델을 이용한 포트/밸브계 및 실린더내의 유동해석

  • 양희천 (여수대하교 자동차공학과)
  • Published : 1998.07.01

Abstract

Applicability of the RNG k-$\varepsilon$ model to the analysis of unsteady axisymmetric turbulent flow of a reciprocating engine including port/valve assembly is studied numerically. The governing equations based on non-orthogonal including port/valve assembly is studied numerically. The governing equations based on a non-orthogonal coordinate formulation with Cartesian velocity components are used and discretised by the finite volume method with non-staggered variable arrangements. The predicted results using the RNG k-$\varepsilon$ model of the unsteady axisymmetric turbulent flow within a cylinder of reciprocating model engine including port/valve assembly are compared to these from the modified k-$\varepsilon$ model and experimental data. Using the RNG k-$\varepsilon$ model seems the have some potential for the simulations of the unsteady turbulent flow within a port/valve-cylinder assembly over the modified k-$\varepsilon$model.

Keywords

References

  1. AIAA J v.27 no.3 Curvature Dependent Two Equation Model for Prediction of Turbulent Recirculating Flows Park, S. W.;Chung, M. K.
  2. 대한기계학회 논문집 v.18 no.1 이차적인 변형율 효과로 나타내는 새로운 변수의 제안 명현국
  3. An Introductory Overview, in Combustion Modeling in Reciprocating Engines Modeling of Fluid motions in Engines Reynolds, W. C.;J. N. Mattavi(ed.);C. A. Amann(ed.)
  4. SAE 820040 Modeling of Turbulence in Internal Combustion Engines Morel, T.;Mansour, N. N.
  5. J. Energy v.7 no.4 K-ε Equation for Compressible Reciprocating Engine Flows El Tahry, S. H.
  6. Proceedings of the Int. Conference on Near Wall turbulent Flows, Tempe, Arizona, U.S.A. v.15 no.17 Renormalization Group Modeling and Turbulence Simulations Orszag, S. A.;Yakhot, V.;flannery, w. S.;Boysan, f.;Choudhury, D.;Maruzewski, J;Patel, B.
  7. J. Sci. Comput v.3 no.35 The Renormalization Group, The ε-Expansion and Derivation of Turbulence Models Yakhot, V.;Smith, L. M.
  8. A First Course in Turbulence Tennekes, H;Lumley, J. L.
  9. ASME J. Fluids Eng. v.107 Steady and Unsteady airflow Through the Intake Valve of a reciprocating Engine Bicen, A. F.;Vafidis, C.;Whitelaw, J. H.
  10. Trans. of the ASME v.109 Valve and In cylinder Flow Generated by a Helical Port in a Production Diesel Engine Arcoumanis, C.;Vafidis, C.;whitelaw, J. H.
  11. ASME J. Fluids Eng. v.109 Correlation Between Valve and In cylinder flow in a Motored Reciprocating Engine Arcoumanis, C.;Vafidis, C.;Vorropouos, G.;Whitelaw, . H.
  12. SAE 870592 Measurment and Multidimensional Prediction of Flow in a Axisymmetric Port/Valve Assembly, SAE 870592 Gosman, A. D.;Ahmed, A. M. Y.
  13. SAE 850344 Multidimensional Modeling of Cold Flows and Turbulence in Reciprocating engines Gosman, A. D.
  14. Ph. D. Thesis, Univ. of London A Finite Volume Method for the Prediction of Three-Dimensional fluid Flow in Complex Ducts Peric, M.
  15. SIAM J. Numerical Analysis v.5 no.3 Iterative Solution of Implicit Approximations of Multidimensional Partial Differential Equations Stone, H. L.
  16. Ph. D. Thesis, Dept. of Mech. and Ind. Eng., University of Illinois at Urbana-Champagn A Numerical Study of the Flow Past an Isolated Airfoil with separation Rhie, C. M.
  17. 대한기계학회 논문집 v.18 no.1 축대칭 왕복엔진의 비정상 난류유동에 대한 수치해석 조진행;유흥선;최영기