한국자동차공학회논문집 (Transactions of the Korean Society of Automotive Engineers)

  • 제6권4호
  • /
  • Pages.32-38
  • /
  • 1998
  • /
  • 1225-6382(pISSN)
  • /
  • 2234-0149(eISSN)
한국자동차공학회 (The Korean Society of Automotive Engineers)
권호 표지

RTM 성형 GFRP 차체 설계에 따른 강성연구

Stiffness Comparison with Design of GFRP Roof Panels Prepared by RTM Method

  • 유용문 (한양대학교 금속공학과 & RASOM) ;
  • 윤의박 (한양대학교 금속공학과 & RASOM) ;
  • 윤여성 (충북대학교 화학과) ;
  • 이순홍 (정회원, 안양대학교 환경공학과)
  • 발행 : 1998.07.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In order to investigate the relationship between the stiffness and structure of the automotive roof panels, two kinds of glass fiber reinforced plastic(GFRP) roof panels without and with insert material were fabricated by resin transfer molding(RTM) method. The stiffness test was performed at the same condition as it of actual driving. The structural design and material selection for improving the recyclability of GFRP roof panels were also covered.

키워드

참고문헌

  1. RTM Report Ashland Chemical Lab
  2. KIMM 연구보고서 RTM 성형기술개발 이상관
  3. Recycling Composites and Design A. Owens;J. Henshaw
  4. 49th Annual Conference Institute Market Development for Recycling Thermoset in Japan Tatsundo Kitamura
  5. 49th Annual Conference Institute Recyclability of Long Glass Mat Reinforced Thermoplastic Composite Hiroyuki Hamada;Sumu Yamaguchi;Gabriel O. Shonaike;Teruo Kimura;Zenichiro Maekawa
  6. Engineering Design for plastics Plastic foams J. D. Friffin;R. E. Skochdopole ;E. Baer(ed.)
  7. Polymer v.10 no.5 발포체의 생성원리와 응용 Shu-Bong, Rhee