한국자동차공학회논문집 (Transactions of the Korean Society of Automotive Engineers)

  • 제6권4호
  • /
  • Pages.121-128
  • /
  • 1998
  • /
  • 1225-6382(pISSN)
  • /
  • 2234-0149(eISSN)
한국자동차공학회 (The Korean Society of Automotive Engineers)
권호 표지

인장과 굽힘응력을 받는 판재의 표면균열해석

Analysis of Surface Crack under Tension and Bending Stress in Plate

  • 발행 : 1998.07.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, when tension and bending stress act on plate simultaneously, stress intensity factor is analyzed at crack tip with using BEM(Boundary Element Method). In this analysis, stress intensity factors(S.I.F) are defined for variable ligament, aspect and stress ratio($\sigma$T/$\sigma$B). Consequently, predicted that crack grow to depth direction at low aspect and ligament ratio in tension stress and to surface direction in bending stress. Tension and bending stress act on plate same time, effect of tension stress in the first stage and effect of bending stress in the after stage was to observed. The outbreak of secondary crack in backside is under the control of stress amplitude and predict that the point of outbreak is mear backside.

키워드

참고문헌

  1. 재료과학 기술연구소 연구논문집 v.5 BEM을 이용한 크랙전파 해석 및 수명 예측에 관한 연구 오환섭;結成良治
  2. 微小な 疲勞き 裂の成長とその下限界條件に關する破壞力學的硏究 v.54 no.399 北川;高橋
  3. 日本機械學會 論文集 v.51 no.462 微小き裂傳ぱ則と部材の疲勞壽命との關係 西谷弘信;後藤眞宏
  4. Ph. D. thesis, Lehigh Univ. The Growth of Fatigue Cracks due to Variations in Load P. C. Paris
  5. ASTM STP 462 Effect of Environments and Complex Load History on Fatigue Life E. K. Walker
  6. ASME Trans. Journal of Basic Engineering Series D. v.89 Numerical Analysis of Crack Propagation in Cyclic-Loaded Structures. R. G. Forman;V. E. Kearney;R. M. Engle
  7. Engineering Fracture Mechanics v.36 no.3 Surface fatigue crack growth under combined tension and bending loading. M. A. Mahmoud
  8. 大韓機械學會 v.22 no.1 회전굽힘응력하에서 환봉재의 미소표면균열의 성장거동해석 오환섭;박철희;이병권
  9. International Journal of Fracture v.60 Boundary Element Crack Closure Calculation of Threedimensional Stress Intensity Factors T. N. Farris;M. Liu
  10. 日本機械學會論文潗 A v.56 no.527 Database of Stress Intensity Factors for Surface Cracks in Pre/Post Penetration Toshiro Miyoshi;Koichiro Ishii;Shoichi Yoshida
  11. 日本機械學會論文潗 A v.56 no.524 境界要素法と影響開數法を用いた表面き裂のK評價 · 進展解析 結城良治;江嶋一行
  12. Engineering Fracture Mechanics v.11 Stress intensity factor for a wide range of semi-elliptical surface cracks in finite thickness plates I. S. Raju;J. C. Newman
  13. 境界要素法 による 彈性解析 結城良治;木須博行
  14. NASA Technical Paper, No. 1578 Analyses of Surface Cracks in Finite Plates Under Tension or Bending Loads J. C. Newman;I. S. Raju
  15. ISES8218 BWRI冷却系配管の健全性評價に關する硏究 高溫構造安全技術組合
  16. ASME Boiler and Vessel Code, Sec. XI Rules for Insurvice Inspection of Nuclear Power Plant Compoments ASME