A Study on the Formation of Cobalt Policide Gate Electrode

코발트 폴리사이드 게이트전극 형성에 관한 연구

  • Shim, Hyun-Sang (Department of Electronic Materials Engineering, The University of Suwon) ;
  • Koo, Bon-Cheol (Department of Electronic Materials Engineering, The University of Suwon) ;
  • Joung, Yeon-Sil (Department of Electronic Materials Engineering, The University of Suwon) ;
  • Bae, Kyoo-Sik (Department of Electronic Materials Engineering, The University of Suwon)
  • 심현상 (수원대학교 전자재료공학과) ;
  • 구본철 (수원대학교 전자재료공학과) ;
  • 정연실 (수원대학교 전자재료공학과) ;
  • 배규식 (수원대학교 전자재료공학과)
  • Published : 1998.06.01

Abstract

For the formation of cobalt polycide gate electrode, CoSi, was grown on columnar poly-Si, granular poly-Si or amorphous Si by depositing either Co monolayer or Co/Ti bilayer and its thermal stability was compared to study effects of the substrate crystallinity and the silicide formation method. When specimens were rapidly heat-treated at 90$0^{\circ}C$ up to 600 seconds, using amorphous Si or Co/Ti on all substrates improved the thermal stability. This was attributed to the uniform chemical composition of initial CoSi, and its smooth interface with the substrates, induced by smooth and clean Si surface and delayed Co diffusion. The main factors determining the thermal stability were found to be composition uniformity and smooth interface of $CoSi_2$, intially formed at the early stage of the heat-treatment.

코발트 폴리사이드 게이트 전극을 형성할 때, 원주형(columnar)과 입자형(granular)다결정 Si 및 비정질 Si 기판위에 Co 단일막(Co monolayer)또는 Co/Ti 이중막(Co/Ti bilayer)을 사용하여 형성한 $CoSi_{2}$의 열정안정을 비교하여 기판의 결정성과 CoSi/ sub 2/ 형성방법이 열적안정성에 미치는 영향을 연구하였다.$ 900^{\circ}C$에서 600초까지 급속열처리하였을 때 , 기판을 비정질을 사용하거나 기판에 관계없이 Co/Ti 이중막을 사용하면 열적안정성이 향상되었다, 이는 평탄하고 깨끗한 기판 Si표면과 지연된 Co확산으로 인해,조성이 균일하고 계면이 평탄한 CoSi$_{2}$가 형성되었기 때문이다. $ CoSi_{2}$의 열적안정성에 가장 중요한 인자는 열처리 초기 처음 형성된 실리사이드의 조성 균일성과 기판과의 계면 평탄성이었다.

Keywords

References

  1. 대한금속학회회보 v.7 no.1 김영욱
  2. 대한금속학회회보 v.7 no.3 Salicide Transistor 기술 동향 이종무;김영욱
  3. v.25 no.11 C.M.Osburn;J.Y.Tsai;J.Sun
  4. J. Vac. Sci. Tech. v.A8 S.Nygren;S.Johansson
  5. 1997 Symp. VLSI Tech. Dig. T.Ohguro;S.Nakamura;E.Morifuji;T.Yoshitomi;T.Morimoto;H.Harakawa;H.S.Momose;Y.Katsumata;H.Iwai
  6. J. Appl. Phys. v.72 no.5 S.L.Hsia;T.Y.Tan;P.Smith;G.E.McGuire
  7. J. of Electronic Materials v.22 no.6 J.Lin;W.Chen;S.Banerjee;J.Lee;C.Magee
  8. 1995 Symp. VLSI Tech. Dig. K.Fujii;K.Kikuta;T.Kikkawa
  9. IEEE IEDM 94 W.M.Chen;J.Lin;J.C.Lee
  10. J. Appl. Phys. v.68 no.3 S.Nygren;S.Johansson
  11. 한국재료학회지 v.4 no.1 김종렬;배규식;박윤백;조윤성
  12. 한국재료학회지 v.5 no.3 김종렬;조윤성;배규식
  13. J. Vac. Sci. Technol. B v.12 no.1 J.Y.Tsai;C.Canovai;C.M.Osburn;Q.F.Wang;J.Rose;A.Cowen;M.S.Denker
  14. J. Vac. Sci. Technol. B v.12 no.6 J.Y.Tsai;C.M.Osburn;C.Canovai
  15. J. Appl. Phys v.81 no.1 G.Palasantzas
  16. Thin-Film Deposition, Principles & Practice D.L.Smith
  17. Handbook of Semiconductor Silicon Technolgy W.C.O'Mara;R.B.Herring;L.P.Hunt(ed.)
  18. The Materials Science of Thin Films M.Ohring