Effect of Distribution and Shape of Cr-Carbide Precipitates on the Caustic stress Corrosion cracking for Ni-Based Alloy 600

크롬계 탄화물의 분포와 형태가 니켈계 합금 600의 염기응력부식에 미치는 영향

  • Kim, Seon-Jae (Nuclear Fuel Technology Center, Korea Atomic Energy Research Institute) ;
  • Choe, Jong-Ho (Dept. of Met.Eng.Korea University) ;
  • Seong, Jin-Gyeong ;
  • Kim, U-Gon (Nuclear Fuel Technology Center, Korea Atomic Energy Research Institute) ;
  • Park, Sun-Dong (Nuclear Fuel Technology Center, Korea Atomic Energy Research Institute) ;
  • Lee, Chang-Gyu (Nuclear Fuel Technology Center, Korea Atomic Energy Research Institute) ;
  • Jeong, Yong-Hwan (Nuclear Fuel Technology Center, Korea Atomic Energy Research Institute) ;
  • Guk, Il-Hyeon (Nuclear Fuel Technology Center, Korea Atomic Energy Research Institute)
  • 김선재 (한국원자력연구소 원자력재료기술개발팀) ;
  • 최종호 (고려대학교 금속공학과) ;
  • 성진경 (산업과학기술연구소 비철재료팀) ;
  • 김우곤 (한국원자력연구소 원자력재료기술개발팀) ;
  • 박순동 (한국원자력연구소 원자력재료기술개발팀) ;
  • 이창규 (한국원자력연구소 원자력재료기술개발팀) ;
  • 정용환 (한국원자력연구소 원자력재료기술개발팀) ;
  • 국일현 (한국원자력연구소 원자력재료기술개발팀)
  • Published : 1998.08.01

Abstract

32$0^{\circ}C$, 40%NaOH 용액의 autoclave에서 약 300wppm의 탄소를 함유하고 있는 15Cr-9Fe-balanced Ni 합금 판상시편에 대해 응력부식 저항성을 조사하였다. 부식시편은 $700^{\circ}C$, 100시간 동안의 열처리로 합금내부에 석출될 수 있는 가능한 한 많은 양의 크롬계 탄화물을 석출시킨 후, 다시 재용해에 의해 크롬계 탄화물의 형태를 조절하는 $800^{\circ}C$-$950^{\circ}C$범위의 최종열처리를 시행하고 급냉시킨 다음 U-자형으로 응력을 가하여 준비되었다. 최종열처리 온도가 올라감에 따라 시편들의 입계응력부식균열(IGSCC ) 전파속도는 $900^{\circ}C$까지는 거의 직선적으로 증가하다가 $950^{\circ}C$에서는 $700^{\circ}C$에서 얻은 값보다도 더 낮게 감소하였다. 즉, 크롬계 탄화물이 재용해되어 그 밀도가 감소함에 따라 IGSCC저항성이 감소하다가 완전히 재용해된 $950^{\circ}C$ 열처리 조건에서 오히겨 가장 큰 IGSCC 저항성을 나타내었다. 이와같은 최조열처리 온도에 따른 니켈계 합금 600의 부식거동은 입계에 존재하는 크롬계탄화물의 형태변화 때문이 아니라 입계에서 탄소-크롬계 탄화물-크롬간의 상평형에 의해 이루어지는 탄소의 입계편석량이 크롬계탄화물이 존재할 때에는 열처리 온도에 따라 증가하다가 그것이 완전히 재용해 되었을 때 가장 낮아지기 때문인 것으로 생각된다.

Keywords

References

  1. Corrosion v.36 G.P.Airey
  2. Corrosion v.33 P.H.Berge;J.R.Donati;Prieux;D.Villard
  3. Corrosion v.38 J.R.Crum
  4. EPRI Report NP-4465 S.M.Bruemmer;L.A.Charlot;C.H.Heneger
  5. Proc. of the 7th Int'l Symp On Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors H.Nagano;H.Kajimura
  6. Proc. of the 5th Int'l Symp On Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors T.M.Angeliu;J.K.Sung;G.S.Was
  7. Proc. of the 3rd Int'l Symp On the Environmental Degradation of Materials in Nuclear Power Plants-Water Reactors F.P.Ford;P.L.Anderson
  8. Met. Trans. A v.21A C.H.Shen;P.G.Shewmon
  9. J. Electrochem. Soc. v.123 J.R.Cels
  10. Corrosion v.35 N.Pessel;G.P.Airey;B.P.Lingenfelter
  11. Corrosion v.43 N.Tostuka(et al.)
  12. Met. Trans. A v.23A J.K.Sung;J.Koch;Angeliu;G.S.Was
  13. Zairyo-to-Kankyo v.41 K.Yamanaka
  14. Acta Metall v.33 G.S.Was;R.M.Kruger
  15. Metall. Trans. A v.18A G.S.Was;V.B.Rajan
  16. Corrosion v.51 M.K.Ahn;H.S.Kwon;J.H.Lee
  17. Scripta Met v.20 N.Totsuka;E.Lunarska;G.Cragnolinq;Z.S.Smialowska
  18. Grain Boundaries in Metal D.McLean