Stainless-steel sxtreme high vacuum system with a new combination pump

새로운 조합 펌프를 사용한 스테인레스 스틸 극고진공 시스템

  • 전인규 (포항공과대학교 물리학과) ;
  • 조복래 (포항공과대학교 물리학과) ;
  • 정석민 (포항공과대학교 물리학과)
  • Published : 1998.02.01

Abstract

We have developed an extreme high vacuum (XHV) system using a new combination pump cpmposed of a suitably shaped NEG(Non-Evaporable Getters) in the body of a sputter-ion pump (SIP). The stainless-steel test chamber was used which had been well oxidized at $450^{\circ}C$ and already yielded XHV with a turbomolecular pumping system. The pressure was measured by a Leybold extractor gauge (EXG,limit:1~$2{\times}10^{-12}$torr, but in the ultimate pressure regionthe EXG shows an unusual sign as $-0.{\times}10^{-12}$ torr which indicates much lower pressure range than its available lower limit. These results are mainly due to the high pumping speed of NEG for hydrogen. Furthermore, use of the SIP combined with the NEG as a XHV pumping system implies the potential for actualization of the surface analysis under XHV environment, and allows one to have a chance tp meet a new world in nanometer science and technology.

이온 펌프의 중심에 네그(Non-Evaporable Getters)가 삽입된 새로운 조합 펌프를 사용하여 극고진공 시스템을 구현하였다. 진공 용기는 터보 분자 펌프만으로도 극고진공에 성공하였던, $450^{\circ}C$에서 잘 산화된 304 스테인레스 스틸 쳄버를 사용하였다. 시스템의 압력은 Leybold사의 EXG(Extractor Gauge)로 측정하였으나, 본 실험에서의 최고 진공도는 이미 그 게이지의 측정 한계인 1~$2\times10^{-12}$torr범위를 훨씬 지나 게이지 지시가 $-0\times10^{-12}$torr를 읽교 있는 극고진공에 도달해 있었다. 이는 효과적인 네그 활성화로 수소 가스에 대한 배기 속도 를 크게 향상시켜준 결과라 볼 수 있다. 또한 본 실험은 극고진공 표면 분석 장치의 실현 가능성을 시사해주는 것으로, 앞으로의 초미세 표면 과학에 있어서 새로운 장을 열어줄 것 으로 기대된다.

Keywords

References

  1. J. Vac. Sci. Technol v.A14 C. Benvenuti;P. Chiggito
  2. Vacuum v.43 J.G.M. Romer
  3. J. Vac. sci. Technol v.A5 M. Audi ;L.Dolcino;F. Doni;B. Ferrario
  4. J. Vac. Sci. Technol v.A5 B.L. Cho;S.T. Lee;S.M. Chung
  5. J. Vac. Sci Technal v.A14 I.k. Chum;B.L. Cho;S.M. Chung
  6. J. Vac. Sci Technal v.A15 I.K. Chun;B.L. Cho;S.M. Chung