Design of Multi-Valued Process using SD, PD

SD 수, PD 수를 이용한 다치 연산기의 설계

  • 임석범 (동의대학교 전자공학과) ;
  • 송홍복 (동의대학교 전자공학과)
  • Published : 1998.09.01

Abstract

This paper presents design of SD adder and PD adder on Multi-Valued Logic. For implementing of Multi-valued logic circuits we use Current-mode CMOS circuits and also use Voltage-mode CMOS circuits partially. The proposed arithmetic circuits was estimated by SPICE simulation. At the SD(Signed-Digit) number presentation applying Multi-Valued logic the carry propagation is always limited to one position to the left this number presentation allows fast parallel operation. The addition method that add M operands using PD( positive digit number) is effective not only for the realization of the high-speed compact arithmetic circuit, but also for the reduction of the interconnection in the VLSI processor. therefor, if we use PD number representation, the high speed processor can be implementation.

본 논문에서는 다치 논리를 기본으로 한 SD 가산기 및 PD 가산기를 설계하였다. 전류 모드 CMOS 회로를 이용하여 다치 논리를 구현하였으며 부분곱으로 전압모드 CMOS 회로도 이용하였다. 설계된 회로에 대한 검증은 대부분 SPICE 시뮬레이션을 통해 확인하였다. 다치 부호를 적용한 SD(Signed-Digit) 수 표현을 사용하여 자리 올림 신호의 전송이 자리수에 관계없이 1단에서 실행되게 함으로써 병렬연산의 고속화를 가능하게 하였고, 또한 M개의 다 입력을 처리하는 가산기에서는 적당한 PD(Positive-digit) 수 표현을 사용하여 가산의 단수를 줄일 수 있으므로 연산의 고속화 및 고집적화를 가능하게 하였다.

Keywords