Bulletin of the Korean Chemical Society

  • 제19권6호
  • /
  • Pages.680-685
  • /
  • 1998
  • /
  • 0253-2964(pISSN)
  • /
  • 1229-5949(eISSN)
대한화학회 (Korean Chemical Society)
권호 표지
DOI QR코드

DOI QR Code

Synthesis of New Biodegradable Crosslinked Polyesters for Biomedical Applcations and Their In-Vitro Degradation

  • 발행 : 1998.06.20
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Two kinds of new aliphatic diols were synthesized by the ring-opening reaction of lactide and glycolide with 1,4-butanediol, a difunctional initiator, in the presence of stannous octoate. The resulting aliphatic diols were melt-polymerized with D-tartaric acid at 150 ℃ to produce new crosslinkable polyesters. They were reacted with hexamethylene diisocyanate in THF at 65 ℃ in a teflon mold for 24 h to prepare sequentially ordered crosslinked polyesters (BD/LT/GL/D-tartarate). Degradation of the prepared yellow crosslinked films was carried out in a buffer solution in order to examine the effect of time, pH, temperature and crosslinking degree on their degradation rate and mechanism. The rate of degradation increased with an increase in pH and temperature, but it decreased with increasing degree of crosslinkage incorporated into the crosslinked polyesters. We also found that the crosslinked polymers were converted into the acidic compounds such as lactic, glycolic, and D-tartaric acids during the degradation.

키워드

참고문헌

  1. J. Mat. Sci. Mat. Med. v.3 Vert, M.;Li, S. M.;Spenlehauer, G.;Guerin, P.
  2. Polymer v.22 Reed, A. M.;Gilding, D. K.
  3. J. Contrilled Release v.35 Crotts, G.;Park, T. G.
  4. J. Biomed. Mater. Res. v.15 Szivek, A.;Weatherly, G. C.;pilliar, R. M.;Cameron, H. V.
  5. Biomat. v.1980 Christel, P.;Chabot, F.;Leray, J. L.;Morin, C.;Vert, M.
  6. Biocompatability Polymers, Metals and Composites Parsons, J. R.;Weiss, A. E.;Szycher, M.(ed.)
  7. Polymers in Medicine and Surgery Kronenthal, R. L.;Oser, Z.
  8. Encycl, polym. Sci. Eng. v.2 Huang, S. J.;Mark, H(ed.);et. al. Eds.
  9. Current Concepts of Bone Fracture Fixation Cororan, S. F.;Koroluk, J. M.;Uhthoff, H. K.(ed.)
  10. Polym. Mat. Sci. Eng. Proc. v.53 Casper, R. A.;Kelley, B. S.;Dunn, R. L.;Potter, A. G.;Ellis, D. N.
  11. Polym. Mat. Sci. Eng. Proc. v.53 Huang, S. J.;Edelman, P. G.
  12. J. Appl. Polym. Sci. v.56 Chu, C. C.;Zhan, L.;Coyne, L .D
  13. Polymers as Biomaterials Jarrett, P.;Huang, S. J.;Shalaby, S. W.(ed.)
  14. Polymer v.22 Reed, A. M.;Gilding, D. K.
  15. Markromol Chem. v.194 Kim, S. H.;Han, Y. K.;Ahn, K. D.;Kim, Y. H.;Chang, Taihyun
  16. J. Apply. Polym. Symp. v.35 Biritto, M. M.;Bell, J. P.;Brenckle, G. M.;Huang, S. J.;Knox, J. R.
  17. J. Polym. Sci. Polym. Phy. Ed. v.22 Fredericks, R. J.;Melveger, A.;Dolegiewitz, L. J.
  18. Makromol. Chem. Rapid Commum v.9 Bruin, P.;Veenatra, G. J.;Nijenhuis, A. J.;Pennings, A. J
  19. Polymer v.20 Gilding, D. K.;Reed, A. M.
  20. J. Biom. Mat. Res. v.15 Chu, C. C.