Elastomers and Composites

  • 제33권1호
  • /
  • Pages.10-16
  • /
  • 1998
  • /
  • 2092-9676(pISSN)
  • /
  • 2288-7725(eISSN)
한국고무학회 (The Rubber Society of Korea)
권호 표지

DGEBA/DDM계 에폭시수지 경화 시험편의 기계적 및 열적특성

Mechanical and Thermal Properties of Cured Specimen or DGEBA/DDM System

  • 김공수 (충북대학교 공과대학 공업화학과) ;
  • 박준하 (충북대학교 공과대학 공업화학과) ;
  • 김기운 (충북대학교 공과대학 공업화학과) ;
  • 김영준 (충남산업대학교 공업화학과)
  • Kim, Kong-Soo (Dept. of lnd. and Eng. Chem., Chungbuk National University) ;
  • Park, Jun-Ha (Dept. of lnd. and Eng. Chem., Chungbuk National University) ;
  • Kim, Ki-Wun (Dept. of lnd. and Eng. Chem., Chungbuk National University) ;
  • Kim, Young-Jun (Dept. of lnd. and Eng. Chem., Chungnam Sanup University)
  • 발행 : 1998.03.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In DGEBA/DDM system, the curing specimen are many curing factors which can affect on thermal and mechanical properties. This study was performed to prove the effect on curing specimen prepared by changing of the curing factors which are curing time and temperature of DGEBA/DDM system. As a result on thermal and mechanical properties, flexural strength, modulus and glass transition temperature (Tg) were increased with curing time and temperature were increased. It was found that the optimum curing condition of DGEBA/DDM system cure at $150^{\circ}C$ for 3hrs at equivalent ratio of 1/1.

키워드