Ultraviolet Photografting Reaction of Acrylamide onto Styrene-Butadiene Rubber

Styrene-Butadiene 고무의 아크릴아미드 UV 광그라프팅 반응

  • Lee, K.I. (Dept. of Chemical Engineering, KyungHee University Yongin) ;
  • Ryu, S.H. (Dept. of Chemical Engineering, KyungHee University Yongin)
  • 이권익 (경희대학교 화학공학과) ;
  • 류승훈 (경희대학교 화학공학과)
  • Published : 1998.12.31

Abstract

Photografting reaction onto styrene-butadiene rubber (SBR) as a function of monomer concentration, irradiation time and carbon black content has been studied using ultraviolet (UV). Acrylamide and benzophenone are used as monomer and photoinitiator, respectively. FT-IR ATR and static contact angle analysis using distilled water are used to measure the graft ratio of acrylamide onto SBR surface. Graft ratio of acrylamide increases with acrylamide concentration and irradiation time and contact angle tends to decrease with increasing graft ratio. It is observed that graft ratio increases with carbon black content.

UV를 이용하여 반응성 모노머인 아크릴아미드를 SBR에 광그라프트 시키는데 있어서 주요한 인자인 모노머 농도, 조사시간 그리고 카본블랙의 함량이 모노머의 그라프트율에 미치는 영향을 살펴보았다. 광개시제로는 benzophenone을 사용하였다. 아크릴아미드의 그라프트율을 측정하기 위하여 FT-IR ATR과 증류수를 이용하여 정접촉각을 측정하였다. 아크릴아미드의 함량과 UV 조사시간이 증가함에 따라 그라프트율은 증가하였으며 또한 접촉각은 감소하는 현상을 나타내었다. SBR중 카본블랙 함량이 증가함에 따라 그라프트율이 증가함을 알 수 있었다.

Keywords