고효율 $CO_2$ Laser 개발 연구 : SMPS 방식 펄스형 $CO_2$ Laser의 출력특성

A Study on the Development of High Efficieny $CO_2$ Laser : Output Characteristics of Pulsed $CO_2$ Laser Using SMPS Method

  • Chung, Hyun-Ju (Dept.of Electric Engineering, Busan National University) ;
  • Lee, Dong-Hoon (Dept.of Electric Engineering, Busan National University) ;
  • Nam, Gyung-Hoon (Dept.of Electric Engineering, Busan National University) ;
  • Kim, Do-Wan (Dept.of Electric Engineering, Busan National University) ;
  • Chung, Young-Hwan (Dept.of Electric Engineering, Busan National University) ;
  • Lee, Yu-Soo (Dept.of Electric Engineering, Busan National University) ;
  • Kim, Hee-Je (Dept.of Electric Engineering, Busan National University) ;
  • Cho, Jung-Soo (Dept.of Electric Engineering, Busan National University)
  • 발행 : 1999.11.01

초록

In this study, it is the purpose to develope a cheap and compact repetitively pulsed $CO_2$ laser with pulse repetition rate range of 180 Hz. We used a SCR switched power supply as a high voltage pulsed supply, which is cheap and simple comparing to others. PIC one-chip microprocessor was used for precise control of a laser power supply on the control part. And the laser cavity was fabricated as an axial and water cooled type. The laser performance characteristics as various parameters, such as pulse repetition rate and gas pressure have been investigated. The experiment was done under the condition of total pressure of $CO_2, N_2$ and He from 4 Torr to 16 Torr and pulse repetition rate from 4 Hz to 180 Hz. As a result, the maximum average output was about 19.6W at the total pressure of 12 Torr and the pulse repetition rate of 180Hz.

키워드

참고문헌

  1. Proc of LAMP '92 Nagaoka v.1 Recent Development of lasers for Materials Precessing P. Loosen
  2. Rev. Sci. Instrum. v.67 laser Hearth Melt Processing of Ceramic Materials J.K.R. Weber;J.J. Felten;P.C. Nordine
  3. CO₂ lasers and Applications v.1042 CO₂ lasers for Military Applications R. C. Harney
  4. High-Resolution Spectroscopy of Transient molecules E. Hirota
  5. Optics & laser Technology v.29 no.4 laser cutting of thick ceramic tile I. BLACK
  6. Handbook of Electrostatic Processes Jen-Shin Chang
  7. Pulse Generators G.N. Glasoe;J.V.Lebacqz
  8. J. Opt. Technol v.65 no.1 repetitively pulsed short-pulse TEA CO2 laser with UV pre-ionization Yu. A. Baloshin;I. V. Pavlishin
  9. Rev. Sci. Instrum. v.53 no.11 High repetition rate mini TEA CO2 laser using a semiconductor prionizer K. R. Rickwood;J. Mclnnes
  10. J. Phys. E: Sci. Instrum v.14 Design of a compact high PRF TEA CO2 laser and performance under multimode and single mode conditions C Baker
  11. Rev. Sci. Instrum. v.51 no.2 Development of a high-repetition-rate mini-TEA CO2 laser N. Menyuk;P. F. Moulton
  12. Sov. J. Quantum Electron. v.11 no.12 Promising systems and methods for pumping high-power technological Co₂ laser G. A. Abil'siitov;E.P. Velikhov;V.S. Golubev;F.V. Levedev
  13. The CO₂laser W. J. Witteman
  14. Rev. laser Eng. v.15 no.4 Development of a 20 kW Fast Axial Flow CO₂ laser H. Sugawara;K. Kuwabara;K. Sasaki;S. Shiono
  15. Appl. Opt. v.35 no.18 Hybrid stable-unstable resonators for diffusion-cooled CO₂slab lasers A. Lapucci
  16. Rev. laser Eng. v.21 no.4 Characteristics of RF Excited CO₂lasers K. Terai
  17. 最先端レ一ザ·テクノロヅ-集成 オブトロニクス社