한국생산제조학회지 (Journal of the Korean Society of Manufacturing Technology Engineers)

  • 제8권4호
  • /
  • Pages.29-37
  • /
  • 1999
  • /
  • 2508-5093(pISSN)
  • /
  • 2508-5107(eISSN)
한국생산제조학회 (The Korean Society of Manufacturing Technology Engineers)
권호 표지

BURR SIZE MEASUREMENT USING A CAPACITANCE SENSOR

  • 발행 : 1999.08.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper involves the "on-line" measurement of burrs using a capacitance sensor. A non-contact capacitance gauging sensor is attached to an ultra precision milling machine which was used as a positioning system The setup is used to measure burr profiles along machined workpiece edges. Experimental procedures and results as well as the basic theoretical principles of the capacitance sensor and specifications of related equipment are presented. The proposed scheme is shown to be accurate easy to setup and with minor modifications readily applicable to automatic deburring processes.processes.

키워드

참고문헌

  1. Trans. ASME J. Eng. Mats. Tech. v.113 no.1 A Study on Burr Formatio Mechanism Ko, S. L.;Dornfeld, D. A.
  2. Precision Engineering v.1 no.4 Deburring Precision Miniature Part Gillespie, L.K.
  3. Annals of the CIRP v.41 Acoustic Emission Feedback For Presicion Deburring Dornfeld, D. A.;Lisiewicz, V.
  4. Trans. ASME J. Dyn. Sys. Meas. Control. v.113 Automated Robotic Deburring of Parts Using Compliance Control. Her, M. G.;Kazerooni, H.
  5. Programming Deburring Robots Based on Human Demonstration with Direct Burr Size Measurement Shimokura, K;Liu, S.
  6. Annals of CIRP v.40 no.1 Sensor-Aided Programming and Movement Adaptation for Robot-Guided Deburring of Casting Seiger, G.;Hsieh, L
  7. Annals of CIRP v.36 no.1 Automation of Deburring Operations by Means of Color Information Takeuchi, Y.(et al.)
  8. MS Report, Dept. of Mechanical Eng. Burr Detection and Measuring Using a Machine Vision System Lam, A. Y.
  9. MS Report. Dept. of mechanical Engineering Burr Dection and Measurement Using a Machine Vision System Bose-Roy, A.
  10. The Proceedings of the Institution of Mechanical Engineers. v.182 Surface Finish Assessment by an ElectricalCapacitance Techniques Sherwood, K.F.;J.R. Crookall
  11. ASME Journal of Dynamic Systems, Measurement and Control. v.107 Surface Profilometry Basedon Fringing Capacitance Measurement Garbivi, J. L.(et.al.)
  12. Proc. of Japan-U.S.A. Symposium on Flexible Automation Design of a Real-Time Suface Roughness Measurement System for Turning Greenslet, J.M.;I.E. Minis
  13. Master's Report Burr Detection and Measurement Using Capacitance Sensor Fang, H.
  14. MetreX Division CapScan and Midas Installation Guide Extrude Hone Corporation
  15. Premiere Edition Innovative Solutions-The Extrude Hone Publi- cation of Machining. Finishing and Measure- ment. Irwin;Extrude Hone Corporation