Journal of the Korean Society of Manufacturing Technology Engineers (한국생산제조학회지)
- Volume 8 Issue 4
- /
- Pages.52-60
- /
- 1999
- /
- 2508-5093(pISSN)
- /
- 2508-5107(eISSN)
An experimental study on the roundness effect for the cutting conditions in a cylinder cutting by end mill
엔드밀에 의한 원통 가공시 절삭조건에 따른 진원도의 실험적 연구
Abstract
In this study the effect of roundness error with respect to the cutting conditions using the external cylindrical work piece by end mill cutting in a machining center was studied. the end mill used in this study is HSS coated with Ti-N which is of Ø 12-4 flutes. The material of workpiece is SM20C and cutting oil is used as a cooling flued The cutting experiments were carried out for the several cutting conditions(depth of cut height of end mill feed rate revolution per minute and cutting direction) and their roundness effects were compared using the least squares circle measuring method. The experimental results are summarized as follows : 1) The cutting depth is dominant for the roundness of a cylindrical work piece and the cutting speed must be determined precisely when the cutting depth is large 2) When the cutting direction in circular manufacturing is the same with the spindle rotation i.e up-cutting condition the surface roundness is also improved.