한국생산제조학회지 (Journal of the Korean Society of Manufacturing Technology Engineers)

  • 제8권4호
  • /
  • Pages.61-67
  • /
  • 1999
  • /
  • 2508-5093(pISSN)
  • /
  • 2508-5107(eISSN)
한국생산제조학회 (The Korean Society of Manufacturing Technology Engineers)
권호 표지

AE신호에 의한 칩 절단성 예측

Chip Breaking Prediction Using AE Signal

  • 발행 : 1999.08.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In turning the chip may be produced in the form of continuous chip or discontinuous one. Continuous chips produced at high speed machining may hit the newly cut workpiece surface and adversely affect the appearance of the surface finish and may interfere with tool and sometimes induce tool fracture. In this study relationship between AE signal and chip form was experimentally investigated, The experimental results show that types of chip form are possible to be classified from the AE signal using fuzzy logic.

키워드

참고문헌

  1. Trans of JSME v.5 A Study of the Chip Breaker Nakayama, K.
  2. Annals of the CIRP v.42 no.1 Automatic Chip-Breaking Detection in Turning by Frequency Analysis of Cutting Force J. L. Andreasen;L. De Chiffre
  3. CIRP v.37 no.1 The Tool Restricted Contant Effect as a Major Influencing Factro in the Chip Breaking an Experimental Analysis Jawahir, I. S.
  4. SME paper Nr. A Systematic Approach to Three-dimensional Chip Curl. Chip Breaking and Chip Control Spaans, C.
  5. CIRP v.1 no.39 Onthe Controllability of Chip Cycle and Modes of Chip Breaking in Metal Machining Jawahir
  6. Int. J. Mech. Sci. v.22 no.5 Acoustic Emission during Orthogonal Metal Cutting Dornfeld;Asibu
  7. ASME v.103 Quantitatice Relationships for Acoustic Emission from Orthogonal Metal Cuttion Dornfeld;Asibu
  8. CIRP v.29 no.1 Detection of Tool Fracture by Acoustic Emission Measurement Moriwaki
  9. 절삭칩의 절단주파수 해석과 뉴럴패턴 인식법을 이용한 절삭가동의 이상진단에 관한 연구 박동삼
  10. 대한기계학회논문집 A권 v.22 no.11 칩절단지수에 의한 칩절단특성평가 이영문;최원식;장승일;허인호
  11. IEEE Trans. Syst. Man Cybern. v.20 Fuzzy Logic in Control Systems : Fuxxy Logic Controller-Part Ⅰ Lee Chuen Chien
  12. IEEE Trans. Syst. Man Cybern v.20 Fuzzy Logic in Control Systems : Fuzzy Logic Controller-Part Ⅱ Lee Chuen Chien
  13. Int. J. Mach. Tools Manufact. v.37 no.9 A Fuzzy Logic Model for Machining Data Selection El Baradie, M. A.
  14. Int. J. Mach. Tools Manufact. v.37 no.9 A Fuzzy-Nets In-Process(FNIP)System for Tool-Breakage Monitoring in End-Milling Operations Chen, J. C.
  15. NAMRI Technical Paper A Study on The Identification of Chip Form using A Sensing Plae with AE Sensor Min Yang Yang;Jae Woong Youn