Design and fabrication of a zoom optics having 20 magnification range for mid-IR(3.7-4.8$\mu$m) FLIR system

3.7-4.8$\mu$m 파장대역 FLIR 시스템을 위한 20:1 줌 렌즈 광학계 설계 및 제작

  • Published : 1999.12.01

Abstract

This paper describes the design and fabrication of mid-IR $(3.7-4.8{\mu}m)$ zoom optics which is used for FUR (Forward Looking Infra-Red) system with 320 $\times$ 240 focal plane arrays. The zoom optics has 20 magnification range and maximun 40$^{\circ}$$\times$30$^{\circ}$ of super wide field of view. The locus of zoom is almost linear, which gives easy access of mechanical and electro-mechanical design. The on-axis MTF of zoom optics has been measured and it shows diffraction limited optical performance. For example, it gives 0.692 at 24 cycles/mm at highest magnification, and 7.6 cycles/mradof resolving power is achieved with the operation of attached micro-scanning system.system.

중적외선 파장대역$(3.7-4.8{\mu}m)$에서 20:1의 줌 비(zoom ratio)를 가지며 최저배율에서는 40$^{\circ}$$\times$30$^{\circ}$의 광시계를 갖는 연속 줌렌즈 광학계를 설계, 제작하였다. 설계된 줌 렌즈 광학계는 F/2.5에 총 7매의 렌즈로 구성되며 실리콘(Si)과 게르마늄(Ge)이 광학재질로 사용된다. 줌 광학계는 적외선 검출기를 최종 상면에 놓을 때 비네트(vignett)에 의한 광학적 errors를 줄이면서도 줌 대물렌즈의 크기를 최소화하기 위한 릴레이 형태의 재결상계(reimaging system)로 설계하였으며, 줌 렌즈의 배율 변화와 1차적인 결상을 담당하는 줌 대물부와 이를 다시 검출기에 재결상 시켜주는 결상부는 구성된다. 줌 대물부는 기계보정식 4군 줌 렌즈 형태로 구성되며 각 군을 구성하는 렌즈 매수를 최소화하여 광학계의 질량 및 크기를 줄이면서도 광학적 성능은 우수하게 유지되도록 설계하였으며 결상부는 1개의 렌즈군으로 구성하였다. 제작된 줌 렌즈 광학계의 축상 MTF를 측정한 결과 최고 배율인 20배에서 공간주파수가 24cycle/mm일 때 4.0$\mu$m파장에 대한 MTF 측정값이 0.692로 회절한계에 가까운 성능을 보였으며, 분해능은 7.6 cycles/crad까지 분해되는 것을 확인하였다.

Keywords

References

  1. Modern Optical Engineering(2nd ed.) W.J.Smith
  2. US PATENT, No.5,022,724 M.Shechterman
  3. Modern lens design W.J.Smith
  4. Thermal Imaging Systems J.M.Lloyd
  5. Jane's ELECTRO-OPTIC SYSTEMS(fourth ed.) K.Atkin(ed.)
  6. 국방과학연구소 기술현황분석보고서(CESD-117-980244) 초점면 배열 열상장비 기술현황분석 홍석민
  7. 국방과학연구소 연구보고서(CESD-420-971154) 초점면 배열 열상의 분해능 향상을 위한 마이크로주사장치 설계 연구 김창우;김현숙