Biaxial Fracture Behavior of Alumina Ceramics ; Thickness Effect on Ball-on-3-ball Test

시편 두께에 따른 알루미나 세라믹스의 이축 파괴 거동

  • 이홍림 (연세대학교 세라믹공학과) ;
  • 박성은 (연세대학교 세라믹공학과) ;
  • 이중현 (연세대학교 세라믹공학과)
  • Published : 1999.07.01

Abstract

Biaxial fracture behavior of alumina specimens with the diameter of 20mm and four kinds of thickness of 1.9, 2.3, 2.6 and 2.8mm was studied by the ball-on-3-ball test and the fracture results were analyzed by he analysis of variance (ANOCA), The strength measured with the down speed prescribed in ASTM showed that the measured strength was not dependent on the thickness of the specimens. Equivalent radius and crack-braching number were observed to increase lineraly with the thickness of the specimens. The jog direction was observed to study the effect of grinding direction on surface flaws. It is though that the surface finishing with #600 grit diamond wheel did not affect the surface flaws of the specimens.

Keywords

References

  1. J. Am. Ceram. Soc. v.61 no.5-6 Loading(L) Factors for the Biaxial Flexure Test K.C. Radford;F.F. Lange
  2. J. Am. Ceram. Soc. v.59 no.5 An Improved Biaxial Flexure Test for Ceramics D.B. Marshall
  3. Ceramic Bulletin v.59 no.12 Biaxial Flexure Tests for Ceramics D.K. Shetty;A.R. Rosenfield;P. McGuire;G.K. Bansal;W.H. Duckworth
  4. 통계분석 이준형
  5. STATISTICA를 이용한 통계정보분석 성웅현;최영훈;이승천;박동련;변종석
  6. 한국산업규격 KS L 1594 고기능 요업제품의 탄성률 시험방법
  7. 한국산업규격 KS L 3114 내화 벽돌의 겉보기 기공률·흡수율 및 비중 측정 방법
  8. ASTM Annual Book of Standards v.15.02 ASTM Standard F394-78
  9. 요업학회지 v.36 no.3 Ball-on-3-ball 시험에서의 이축 강도의 결정 박성은;이중현;이홍림
  10. J. Am. Ceram. Soc. v.64 no.1 Biaxial Fracture Studies of a Glass-Ceramic D.K. Shetty;A.R. Rosenfield;G.K. Bansal;W.H. Duckworth
  11. J. Appl. Mech. v.18 no.3 Statistical Distribution Function of Wide Applicability W.A. Weibull
  12. J. Am. Ceram. Soc. v.47 no.6 Analysis of Fracture Probabilities in Nonuniformly Stressed Brittle Materials N.A. Weil;I.M. Daniel
  13. 한국요업학회지 v.34 no.10 알루미나 세라믹스의 동적 피로 거동 이홍림;이규형;박성은
  14. 통계분석 이준형