Journal of the Korean Ceramic Society (한국세라믹학회지)

The Korean Ceramic Society (한국세라믹학회)
권호 표지

Processing and Characterization of a Direct Bonded SOI using SiO$_2$ Thin Film

SiO$_2$ 박막을 이용한 SOI 직접접합공정 및 특성

  • 유연혁 (연세대학교 세라믹공학과) ;
  • 최두진 (연세대학교 세라믹공학과)
  • Published : 1999.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

SOI(silicon on insulafor) was fabricated through the direct bonding using (100) Si wafer and 4$^{\circ}$off (100) Si wafer to investigate the stacking faults in silicon at the Si/SiO2 oxidized and bonded interface. The treatment time of wafer surface using MSC-1 solution was varied in order to observe the effect of cleaning on bonding characteristics. As the MSC-1 treating time increased surface hydrophilicity was saturated and surface microroughness increased. A comparison of surface hydrophilicity and microroughness with MSC-1 treating time indicates that optimum surface modified condition for time was immersed in MSC-1 for 2 min. The SOI structure directly bonded using (100) Si wafer and 4$^{\circ}$off (100) Si wafer at the room temperature were annealed at 110$0^{\circ}C$ for 30 min. Then the stacking faults at the bonding and oxidation interface were examined after the debonding. The results show that there were anomalies in the gettering of the stacking faults at the bonded region.

Keywords

References

  1. Semiconductor Memories;Technology, Testing and Reliability A. K. Sharma
  2. IEEE Circuits and Device Magazine Porous Silicon Technique for SOI Structure S. S. Tsao
  3. IEEE Circuits and Device Magazine Zone-melting-recrystallization Silicon-On-Insulator Technology B. Y Tsaur
  4. Silicon-On-Insulator Technology:Materials to VLSI J P. Colinge
  5. SOI & Buried Metals in Si MRS Symposium A High Performance Submicrometer CMOS/SOI Technology using Ultrathin Silicon Films on SIMOX P. K. Vasudev(et al)
  6. Appl. Phys. Lett. v.48 no.1 Wafer Bonding for Silicon-On-Insulator Technologies J. B Lasky
  7. Jpn. J. Appl Phys. v.31 no.6A Pulse-Field-Assisted Wafer Bonding for Silicon on Insulator Y. Arimoto;F. Sugimoto
  8. Proc. of the Sixth International Symposium v.94-11 Silicon-On-Insulator Technology and Device S Cristoloveanu
  9. J. Electrochem. Soc. v.138 no.1 Silicon-On-Insulator by Wafer Bonding:A Review W. P. Maszara
  10. J. Electrocem. Soc. v.142 no.10 A Simple Chemical Treatment for Preventing Thermal Bubbles in Silicon Wafer Bonding Q. Y. Tong;G Kaido;L. Tong;M. Reiche;F. Shi;J. Steinkirchner;T. Y. Tan;U Goesele
  11. J. Electrochem. Soc. v.143 no.5 Modification of Silicon Surface with H₂SO₄:H₂O₂:HF and HNO₃:HF for Wafer Bonding Application K. Ljungberg;U. Jansson;S. Bengtsson;A. Soderbarg
  12. ULSI Technology S. M Sze
  13. J. Electrochem. Soc. v.143 no.7 Nonuniformities in Chemical Oxides on Silico Surfaces Formed during Wet Chemical Cleaning T Aoyama;T. Yamazaki;T. Ito
  14. ULSI Technology S. M Sze
  15. J. Electrocem. Soc. v.143 no.5 A Model of Low-Temperature Wafer Bonding and its Apllication Q. Y. Tong;U. Goesele(et al)
  16. J. Appl Phys. v.57 no.7 Point Defect Generation during Oxidation of Silicon in Dry Oxygen I theory S. T. Dunfam;J D. Plummer
  17. Silicon Processing for the VSLI Era v.1 S Wolf;R. N. Tauber
  18. J. Appl. Phys. v.42 Effect of Crystal Orientiation on the Stacking Faults Formation in Thermally Oxidized Silicon Y Sugita;T. Gato;M. Tamura
  19. J. Mat. Sci. Lett. v.32 Tilt-axis Effect on Oxidation Behaviour and Capacitance-Voltage Characteristics of (100) Silicon H. J. Woo;D. J. Choi;G. H. Kim
  20. ULSI Technology S. M. Sze
  21. J. Electrochem. Soc. v.126 no.3 Defect Etch for <100> Silicon Evaluation D G. Schimmel
  22. J. Kor. Phys. Soc. v.30 The Etching Effect of NH₄OH Last Cleaning on the Silicon Surface C. H. Lee;K. S. Yu
  23. J. Electrochem. Soc v.144 no.1 The Role of Surface Chemistry in Bonding of Standard Silicon Wafers Q. Y. Tong;U. Goesele(et al)
  24. Jpn. J. Appl Phys. v.31 no.4 Bond Strength of Bonded SOI Wafers F. Sugimoto;Y Arimoto
  25. Semiconductor Silicon Crystal Technology F. Shimura