Thermal shock behavior of alumina ceramics by ball-on-3 ball test

Ball-on-3 ball test에 의한 알루미나 세라믹스의 열충격 거동

  • 이중현 (연세대학교 세라믹공학과) ;
  • 박성은 (연세대학교 세라믹공학과) ;
  • 한봉석 (연세대학교 세라믹공학과) ;
  • 이홍림 (연세대학교 세라믹공학과)
  • Published : 1999.10.01

Abstract

The flexural strength distribution of alumina ceramics was observed using ball-on-3 ball test after thermal shock into the distilled water of 25$^{\circ}C$ Crack distribution was also observed by dye-penetration after thermal shock test. Fracture probability of alumina ceramics by ball-on-3 ball test was studied and compared with that by 3-point bending test. The crack distance from the center of thespecimen showed the stronger effect on the flexural strength by ball-on-3 ball test than the crack density.

상온 25$^{\circ}C$의 증류수에 단일 열충격을 시행한 후 ball-on-3 ball test로 강도를 측정하고 강도의 변화를 관찰하였다. 시편은 상용 알루미나 시편을 사용하였고, disc 형태의 시편에 대하여 열충격 후의 균열의 모양과 강도 시험 후의 균열의 모양을 잉크 침투법에 의해 관찰하였다. 통계적인 파괴 확률방법을 제시하였으며, thermal shock Weibull plot을 이용하여 3점 꺾임 강도와 비교하였다. ball-on-3 ball test 강도에 미치는 인자에 대해 통계학적인 접근을 통해 관찰한 결과, 시편중심에서 균열까지의 거리가 균열 밀도보다 더 큰 영향을 미치고 있음을 알 수 있었다.

Keywords

References

  1. J. Am. Ceram. Soc. v.61 no.7 A General Approach for the Statistical Analysis of Multiaxial Fracture A. G. Evans
  2. J. Am. Ceram. Soc. v.53 no.9 Strength Behavior of Polycrystallinge Alumina Subjected to Thermal Shock D. P. H. Hasselman
  3. J. Ceram. Soc. Japan v.106 no.6 Statistical Approach to Strength Degradation Analysis during Water Quenching H. Awaji;S. Honda;T. Nishikawa
  4. 박사학위논문, 연세대학교 $Al_2O_3$세라믹스의 열충격 파괴거동과 열응력 해석 한봉석
  5. J. Am. Ceram. Soc. v.61 no.5;6 Loading(L) Factors for the biaxial Flexure Test K. C. Radford;F F. Lange
  6. Am. Ceram. Soc. Bull. v.59 no.12 Biaxial Flexure Tests for Ceramics D. K. Shetty;A. R. Rosenfield;P. McGuire;G. K. Bansal;W. H. Duckworth
  7. J. Am. Ceram. Soc. v.53 no.9 Strength Behavior of Polycrystalline Alumina Subjected to Thermal Shock D. P. H. Hasselman
  8. 요업학회지 v.35 no.10 알루미나 세라믹스의 열피로 거동 정우찬;한봉석;이홍림;이형직
  9. ASTM Annual Book of Standards v.15 no.2 ASTM standard F394-78 ASTM
  10. 요업학회지 v.36 no.3 Ball-on-3-Ball 시험에서 이축강도의 결정 박성은;이중현;이홍림
  11. STATISTICA를 이용한 통계정보분석 성응현;최영훈;이승천;박동련;변종석
  12. J. Am. Ceram. Soc. v.52 no.8 Average Grain Size in Polycrystalline Ceramics M. I. Mendelson