References
-
Inter. Sym. on Advanced Materials with Biomedical Applications
Mechanical Proeprties, Phase Stability and Biocompatibility of
$(Y. Nb)-TZP/Al_2O_3$ Composite Abutments for Dental Implant D. Y. Lee;D. J. Kim;M. H. Lee;J. S. Han - J. Eur. Ceram. Soc. v.15 Environmental Degradation of Zirconia Ceramics S. Lawson
-
J. Am. Ceram. Soc.
v.70
no.8
Low-Temperature Aging of
$ZrO_2$ Polyerystals with 3 mol%$Y_2O_3$ H. Lu;S. Chen - J. Mater. Sci. v.30 The Effect of Ceria Co-doping on Chemical Stability and Its Fracture Toughness of Y-TZP M. M. R. Boutz;A. J. A Winnubst;B. Van Langerak;R. J. M. O. Scholtenhuis;K. Kreuwel;A. J. Butggraaf
- Ceramic Transactions Ceramic Powder Science III v.12 Effects of Oxide Additions on the Stability of the Tetragonal Phase in TZP Ceramics H. Hoffmann;B Michel;L. J. Gauckjet;J Allemann;G.L. Messing(ed.); S. Hirano(ed.);H. Hausner.(ed.)
-
Mater. Lett.
v.39
no.4
Phase Stability of (Y. Nb)-
$ZP/Al_2O_3$ Composites under Low Temerature Hydrothermal Conditions D. Y. Lee;D. J. Kim;J. W. Jang;D. W. Choi;S. J. Lee -
J. Am. Ceram. Soc.
v.68
no.1
Strength and Fracture Toughness of Isostatically Hot-Pressed Composites of
$Al_2O_3$ Partially stabilized$ZrO_2$ K. Tsukuma;K. Ueda;M. Shimada -
J. Ceram. Soc. Jpn.
v.99
no.2
Fabrication and Properties of (Y Ce)-
$ZP/Al_2O_3$ and Y-$TZP/Al_2O_3$ Composites from Fine Powders Prepared by a Hydrolysis Technique M. Hirano;H. Inada -
한국결정성장학회지
v.7
no.3
$Y_2O_3Ta(Nb)_2O_5-ZrO_2$ 삼성분계 상태도 이득용;김대준;장주옹;이명현 -
J. Mater. Sci. Lett.
v.17
no.3
Low-Temperature Phase Stability and Mechanical Properties of
$Y_2O_3$ and$Nb_2O_5$ Co-doped Tetragonal Zirconia Polycrystal Ceramics D. Y. Lee;D. J. Kim;D. H. Cho - J Am.Ceram. Soc. v.74 no.2 Effect of Dopants on Zirconia Stabilization-An X-ray Absorption Study: III. Charge-Compensating Dopants P. Li, I. Chen;J. E. Penner-Hahn
-
Ceram. Inter.
v.24
no.6
Effect of
$Nb_2O_5$ and$Y_2O_3$ Alloying on the mechanical properties of TZP Ceramics D. Y. Lee;D. J. Kim;D. H. Cho;M. H. Lee -
Mater. Trans. JIM.
v.39
no.2
Mechanical Properties of Hot-Pressed TZP Ceramics Doped with
$Nb_2O_5$ and$Y_2O_3$ D. Y. Lee;D. J. Kim;K. S. Cho -
J. Am. Ceram. Soc.
v.68
no.2
High Temperature Strength and Fracture Toughness of
$Y_2O_3$ Partially Stabilized$ZrO_2/Al_2O_3$ Composites K. Tsukuma;K. Ueda;K. Matsushita;M. Shimada - Quantitative Stereology E. E Underwood
- ASTM Annual Book of Standards v.1502 Biaxtal Felxure Strength(Modulus of Rupture) of Ceramic Substrate ASTM Standard F394-78
- J. Am. Ceram. Soc. v.78 no.10 Microstructure Flaw Tolerance and Reliability of Ce-TZP and Y-TZP Ceramics M. J. Readey;C. L. McCallen
- J. Am. Ceram. Soc. v.64 no.9 A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: Ⅱ. Strength Method P. Chantikul;G. R. Anstis;B. R Lawn;D B. Marshall
- Conim. Am. Ceram. Soc. v.65 A Simple Method for Determining Elastic-Modulus-to-Hardness Ratios using Knoop Indentation Measurements D. B. Marshall;T. Noma;A. G. Evans
- J. Am. Ceram. Soc. v.67 no.6 Phase Analysis in Zirconia Systems R.C. Garvie;P. S. Nicholson
-
J. Am. Ceram. Soc. in Press
R-curve Behavior and Hydrothermal Stability of (Y. Nb)-TZP
$/Al_2O_3$ Composites D. Y. Lee;D. J. Kim;B. Y. Kim - Fracture of Brittle Solids(2nd ed.) B. R. Lawn
-
J. Mater. Sci.
v.28
Processing and Properties of Y-TZP/
$Al_2O_3$ Composites D. D. Upadhyaya;P. Y. Lalvi;G. K. Dey -
J. Mater. Sci.
v.28
Mechanical Properties of
$Al_2O_3$ Particle-Y-TZP Matrix Composite and its Toughening Mechanism J. L. Shi;B. S. Li;T. S. Yen -
J. Am. Ceram. Soc.
v.78
no.4
Fracture Toughness of
$Al_2O_3$ Particle Dispersed$Y_2O_3$ Partially Stabilized Zirconia J. F. Li;R. Watanabe -
J. Am. Ceram. Soc.
v.76
no.43
Infuence of ZrO₂Gram Size and Content on the Transformation Response in the
$Al_2O_3-ZrO_2(12 mol% CeO_2)$ System P. F. Becher;A. B. Alexander;A. Bleier;S. B. Waters;W. H. Warwick - J. Am. Ceram. Soc. v.80 no.7 Computer Simulation of Grain Growth and Ostwald Ripening in Alumina-Zriconia Two Phase Composites D. Fan;L. Chen
- Acta Metall. v.31 no.4 Crack Deflection Processes-I Theory K. T. Fabet;A. G. Evans
- J. Am. Ceram. Soc. v.68 no.4 Limitation of Maxium Strength of Zirconia Toughened Ceramics by Transformation Transformation Toughening Increment M. V. Swain
- J. Am. Ceram. Soc. v.69 no.7 Strength Limitations of Transformation Toughened Zirconia Alloys M. V, Swain;L. R. F. Rose
-
J. Am. Ceram. Soc.
v.77
no.5
Indentation Studies on
$Y_2O_3$ Stabilized$ZrO_2$ : I. Development of Indentation-Induced Cracks M. S. Kaliszewski;G. Behrens;A. H. Heuet;M. C. Shaw;D. B. Marshall;G. W. Dransmann; R. W. Steinbrech;A. Pajares;F. Gurberteau;F. L. Cumbrera;A. Dominguez-Rodriguez -
J. Am. Ceram. Soc.
v.77
no.5
Indentation Studies on
$Y_2O_3$ Stabilized$ZrO_2$ : II, Toughness Deteroination fromStable Growth of Indentation-Induced Crack G. W Dransmann;R W. Steinbrech;A. Pajares;F. Guiberteau;A. Dominguez-Rodriguez;A. H. Heuer - J. Am. Ceram. Soc. v.63 no.9-10 Elastic Plastic Indentation Damage in Ceramics: The Median Radial Crack System B. R. Lawn;A. G. Evans;D. B. Marshall
- J. Am. Ceram. Soc. v.82 no.8 Correlation of Fracture Touhgness and Strength R. G. Munro;S. W. Freiman