Abstract
This work was focused on the synthesis and their catalytic performance on microporous materials having various pore types and dimensions in structures, such as the SAPO-34 and the SAPO-44 with CHA type, the SAPO-17 with ERI type of three dimensional structures, and the ZSM-23 with MTT type of one dimensional structure. Synthesized materials exhibited various acidities and the selectivities to olefin in methanol conversion. As a result, the order of their acid strength was as follows; SAPO-44>SAPO-34>SAPO-17>ZSM-5. On the other hand, the CHA type materials, such as SAPO-34 and SAPO-44, had high selectivity to light olefins(ethylene or propylene), and ZSM-23 with MTT typ of one dimensional structure showed high selectivity to paraffins over $\textrm{C}_{5}$~. This result is a proof that the structure in material had strong influence on catalytic performance. In addition, a surprising result is that the catalytic selectivity to ethylene enhanced on Ni-corporated materials compared with the non-corporated.
삼차원적 골격구조를 가지며 세공의 크기와 산성도가 유사한 SAPO-44, SAPO-34(CHA type), SAPO-17(ERI type), 그리고 1차원적 고격구조를 가진 ZSM-23(MTT type) 촉매재료를 합성하고, 메탄올 전환방응에 있어서의 촉매적 성능을 비교 검토하였다. 이들의 산성도 세기는 SAPO-44>SAPO-34>SAPO-17>ZSM-23 순으로 나타났다. 메탄올 전환반응을 비교한 결과, 삼차원적 골격구조를 가지고 있는 SAPO-34와 SAPO-44에서 높은 에티렌 선택성이 얻어졌으며, 특히 Ni을 골격내에 도입시켰을 때 그 선택율은 더욱 증가하였다. 반면에 1차원적 골격구조를 가지고 있는 ZSM-23에서는 입체적 형상선택성의 감소로 올레핀보다는 파라핀의 선택율이 우세하였다.
