Abstract
The interfacial reaction and joint properties of Sn-3.5Ag/Cu and Sn-3.5Ag-1Zn/Cu joint were studied. Modified double lap shear solder joints of Sn-3.5Ag and Sn-3.5Ag- lZn solder were aged for 60days at $100^{\circ}C$ and $150^{\circ}C$ and then loaded to failure in shear. The Sn-3.5Ag/Cu had a fast growth rate of the reaction layer in comparison with the Sn-3.5Ag-lZn at the aging temperature of $150^{\circ}C$ Through the SEM/EDS analysis of solder joint, it was proved that intermatallic layer was $Cu_{6}Sn_5$ phase and aged specimens showed that intermatallic layer grew in proportion to $t_{1/2}$, and the precipitate of $Ag_3Sn$ occur to both inner layer and interface of layer and solder. In case of Zn-containing composite solder, $Cu_{6}Sn_{5}$ phase formed at the side of substrate and $Cu_{5}Zn_{8}$ phase formed at the other side in double layer. The shear strength of the Sn-3.5Ag/Cu joint improved by addition of IZn. The strength of the joint increases with strain rate and decreases with aging temperature
Sn-3.5Ag, Sn-3.5Ag-lZn Eoa납과 Cu기판과의 계면반응 및 접합특성에 관하여 검토하였다. Eoa납과 Cu기판이 접합된 시편은 $100^{\circ}C$와 $160^{\circ}C$에서 60일간 열처리하였으며, 전단하중을 가하여 강도를 측정하였다. $150^{\circ}C$에서 열처리에 따른 계면반응층의 두게는 Sn-3.5Ag/Cu계면이 Sn-3.5A9-IZn/Cu계면보다 빠르게 성장하였으며, 반응생성물 성장은$ t_{1/2}$에 비례하여 체적 확산 경향을 나타냈다. 계면 반응생성물은 Sn-3.5Ag/Cu계면의 경우 $Cu_{6}Sn_{5}$상이 형성되었고, $Ag_3Sn$상은 반응층 내부 및 반응층과 땜납의 계면에 석출하였으며, Zn을 첨가한 경우에는 계면에 $Cu_{6}Sn_{5}$ 상과 함께 $Cu_{5}Zn_{8}$상이 형성되었다. 땜납/기판의 전단강도는 Sn-3.5Ag합금에 Zn을 1% 첨가하면 증가하였으며, 열처리를 한 경우에는 감소하였다.
