Tribology and Lubricants

Korean Tribology Society (한국트라이볼로지학회)
권호 표지
DOI QR코드

DOI QR Code

Preparation and Erosion Properties of Reaction-Bonded SiC Reinforced by Carbon Fiber

탄소섬유로 강화된 반응소결 SiC 제조 및 Erosion 특성

  • 송진웅 (고려대학교 재료공학과) ;
  • 임대순 (고려대학교 재료공학과) ;
  • 김형욱 (고려대학교 공학기술연구소)
  • Published : 1999.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

Three kinds of reation-bonded SiC that reaction-bonded SiC(RBSC), RBSC reinforced by carbon fiber and RBSC reinforced by activated carbon fiber were prepared for investigating the change of erosion properties. The characteristics of microstructures and the phases have been investigated by using scanning electron microscope and XRD analysis. The hardness test toughness test and erosion test was carried out. In the cases with no carbon fiber, those kind of specimens had the highest value of hardness and the lowest value of toughness. With the increase of carbon fiber content the hardness and the weight loss were decreased, but the toughness was increased in the cases with carbon fiber. In the cases with activated carbon fiber specimens had the highest value of toughness and the lowest value of hardness with 30% contents of activated carbon fiber.

Keywords

References

  1. Special Ceramics The Preparation of Dense Self-Bonded Silicon Carbides Popper,P.
  2. J. Kor. Ceram. Soc. v.31 no.4 Properties of SiC/MoSi₂Composites Prepared by Reaction Sintering Method Han,I.S.;Yang,J.H.;Suhr,D.S.
  3. Special Ceramics 5 Forrest,C.W.;Kennedy,P.;Shennan,J.V.
  4. Ceram. Eng. Sci. Proc. v.9 no.7;8 Processing of Reaction-Bonded Silicon Carbide without Residual Silicon Phase Messner,R.P.;Chiang,Y.M.
  5. J. Mat. Sci. Lett. v.9 Melt Infiltration of Selected Intermetallics into SiC Rawera,J.C.;Wrzesinski,W.R.
  6. The Principles of Engineering Materials Barrett,Nix;Tetelman
  7. Acta. Metall. v.37 The Mechanical Behavior of Ceramic-Matrix Composite Evans,A.G.;Marshall,D.B.
  8. Carbon v.32 no.4 Activated Carbon Fiber: Fundamentald and Applications Suzuki,M.
  9. Carbon v.34 Modelling the Gasfication of Carbon Fiber Fuertes,A.B.;Marban,G.;Munniz,J.
  10. Mat. Res. Soc., Symp. Proc. v.344 A New Preparation of Activated Carbon Fiber Fu,R.;Lu,Y.;Lu,H.;Zeng,H.
  11. ASTM Spec. Tech. Publ. v.664 Solid Particle Erosion of High Technology Ceramics, Erosion: Prevention and Useful Applications Gulden,M.E.
  12. Wear v.184 Effects on a sheet surface of an erosive particle jet upon impact Chevallier,P.;Vannes,A.B.
  13. Wear of Material Peterson,L.G.;Sargent,G.A.;Corand,H.;K.C.Ludema(ed.)
  14. J. Mat. Sci. v.25 Characterization of Engineering Ceramics by Indentation Method Dietz,M.;Tietz,H.D.
  15. Wear v.35 Measurement of Solid Particle Velocity in Erosive Wear Ruff,A.W.;Ives,L.K.
  16. J. Chem. Phy. v.30 no.6 Solublity of Carbon in Silicon and Germanium Scace,R.I.;Slack,G.A.