A Design of the Wideband Microstrip Patch Antenna Using Three-dimensional Transition

3차원 트랜지션을 이용한 광대역 마이크로스트립 패치 안테나의 설계

  • 정창권 (경상대학교 전자공학과) ;
  • 강치운 (동의공업대학 전자통신과) ;
  • 윤서용 (경상대학교 전자공학과) ;
  • 이봉석 (경상대학교 전자공학과) ;
  • 김우수 (동의공업대학 전자통신과) ;
  • 이문수 (경상대학교 부설 정보통신연구센터)
  • Published : 1999.06.01

Abstract

In this paper, it is designed a new type single layer patch antenna which is printed on a very thin film and separated from the ground-plane by foam with a low permitivity of 1.06 and a high thickness of around quarter wavelength. It allows the use of three-dimensional transition, from one level to another, so that its bandwidth can be enhanced by wideband impedance matching. The radiation pattern, return loss, and VSWR of the antenna are calculated using "IE3D" simulation package, and compared with the experimental results. Experimental results show that the bandwidth is about 65% of center frequency 6.8 GHz, return loss and VSWR are in a fairly good agreement with the calculations.culations.

본 논문에서는 유전율 1.06, 두께 $\lambda$/4인 발포체 기판상의 얇은 필름에 인쇄한 새로운 형태의 단일층 마이크로스트립 패치 안테나를 설계했다. 안테나의 대역폭이 광대역 임피던스정합을 얻기 위하여 3차원 트랜지션을 사용한다. 안테나의 방사패턴 및 반사손실, 전압정재파비는 "IE3D" 시뮬레이션 패키지를 사용하여 계산하여 측정결과와 비교했다. 측정 결과 전압정재파비 $\le$ 2:1 인 대역폭이 중심주파수 6.8 GHz에서 약 65%로 광대역 안테나임을 입증하였다. 그리고 반사손실 및 전압정재파비는 계산치와 실험치가 거의 일치하였다. 거의 일치하였다.

Keywords