Abstract
The creep of concrete structures caused by variable stresses is generally calculated by step-by-step method based on the superposition of creep function. Although most practical application is carried out by this linear assumption. significant deviations between predictions and experiments have been observed when unloading takes place, that is. stress is reduced. This shows that the superposition of creep function does not describe accurately the effect of sustained compressive preload. The main purpose of this study is to propose a creep analysis model which is expressed with both creep function and creep recovery function where increase or decrease of stress is repeated. In these two function method, the creep behavior is modelled by using linear creep law for loading and creep recovery law for unloading. To apply two function method to time analysis of concrete structures, the calculation method of creep strain increment under varying stress is proposed. The calculation results based on the present method correlates very well with test data, but the conventional superposition method exhibits large deviation from test results. This paper provides a more accurate method for the time dependent analysis of concrete structures subjected to varying stress, i.e. increasing or decreasing stress. The present method may be efficiently employed in the revision of future concrete codes.
콘크리트 구조물의 크리프해석은 주로 크리프식의 중첩원리에 기초한 방법에 의해 수행되고 있다. 그러나 크리프식의 중첩을 응력이 증가하거나 일정할 경우에는 비교적 정확한 예측이 가능하지만, 응력이 감소하는 경우에는 상당한 오차를 나타낸다. 이것은 지속하중과 응력감소 과정에서 크리프와 관련된 콘크리트의 성질이 변화되므로 크리프 회복을 크리프 식의 중첩으로 정확하게 모사할수 없기 때문이다. 따라서, 본 연구에서는 감소와 증가를 반복하는 응력 이력을 지니는 콘크리트 구조물의 좀더 정확하고 합리적인 장기거동 해석을 위하여 응력의 감소를 단순히 크리프식의 중첩에 의해 해석한 기존의 방법과는 달리 크리프식과 크리프 회복식으로 표현하여, 소위 2함수 방법(two-function method)를 콘크리트구조물의 해석에 적용하는 방법을 제시하였다. 본 연구의 2함수방법을 콘크리트 구조물의 장기거동 해석을 적용하기 위해, 시간단계 동안 다양한 응력 변화에 대하여 크리프 변형도 증분량을 계산하는 방법을 제시하였다. 본 연구의 해석방법에 의해서 해석된 결과를 기존의 크리프식의 중첩에 의한 결과 및 기존의 실험결과들과 비교 분석한 결과, 기존의 중첩법은 실험결과와 많은 차이를 보이고 있으나 본 연구의 해석방법은 실험결과와 잘 맞고 있음을 보여주고 있다. 따라서, 크리프회복식을 이용하는 본 연구의 해석방법은 기존의 크리프식의 중첩방법이나 기존의 설계기준에 비해 변화하는 응력이력 하에서의 콘크리트 구조물의 크리프거동을 더 정확하게 서술할 수 있는 방법으로서 앞으로 설계기준 작성과 실제 구조물 해석에 효율적인 응용이 기대되고 있다.