Development of a New Method for Total Isocyanate Determination Using the Reagent 9-Anthracenylmethyl 1-Piperazinecarboxylate(PAC):Part 1 - The reaction condition and stability

9-Anthracenylmethyl 1-Piperazinecarboxylate(PAC)을 이용한 공기중 총이소시아네이트 분석방법 개발:제1부 반응조건 및 안전성

A new analytical procedure for the measurement of monomeric isocyanates and total isocyanate group in workplaces has been investigated. The method described herd involves derivatization of the isocyanate sample upon collection with the reagent 9-anthracenylmethyl 1-piperazinecarboxylate (PAC). Laboratory investigations have demonstrated that excess PAC reagent can be satisfactorily removed from PAC-derivatized monomeric isocyanates-a requirement for the success f the analytical procedure. After removal of excess PAC reagent, the PAC derivatives of butyl isocyanate, phenyl isocyanate, HDI, MDI, and TDI were reacted with sodium thiomethoxide to convert them all to 9-anthracenylmethyl methyl sulfide (AMMS). Total isocyanate group was determined by HPLC analysis and quantification of the single AMMS peak. This circumvents many of the disadvantages associated with current HPLC methods. There were no longer problems associated with quantifying late-eluting peaks and analysis times were very short. A single detector was used for quantification because a standard of the analyte existed and the retention time could be determined. Because all species were converted to a single analyte, the problem of variability of response factors among different species was averted. Finally, there were no complex chromatograms to interpret. Monomers of other individual species were measured by analysis of the sample before the individual species were converted to AMMS. The favorable performance of PAC warrants its further study as a reagent for the determination of total isocyanate group in air.