Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Improvement of Interfacial Bonding Shear Strength of Ti50-Ni50 Shape Memory Alloy Composite

Ti_{50}-Ni_{50} 형상기억합금 복합체의 계면 접학 전단강도 향상에 관한 연구

  • Published : 2000.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, single fiber pull-out test is used to measure the interfacial bonding shear strength of $Ti_{50}-Ni_{50}$ shape memory alloy composite with temperature. Fiber and matrix of $Ti_{50}-Ni_{50}$ shape memory alloy composite are respectively $Ti_{50}-Ni_{50}$ shape memory alloy and epoxy resin. To strengthen the interfacial bonding shear stress, various surface treatments are used. They are the hand-sanded surface treatment, the acid etched surface treatment and the silane coupled surface treatment etc.. The interfacial bonding shear strength of surface treated shape memory alloy fiber is greater than that of surface untreated shape memory alloy fiber by from 10% to 16%. It is assured that the hand-sanded surface treatment and the acid etched surface treatment are the best way to strengthen the interfacial bonding shear strength of $Ti_{50}-Ni_{50}$ shape memory composite. The best treatment condition of surface is 10% HNO$_3$ solution in the etching method to strengthen the interfacial bonding shear strength of $Ti_{50}-Ni_{50}$ shape memory alloy composite.

Keywords

References

  1. Hawong J. S., Shimamoto A., Lee, H. J., Furuya Y., 1997, 'Study on the Development of Photoelastic Experiment Model Material for $Ti_{50}-Ni_{50}$ SMA-FRP,' Proceedings of SPIE(The international Society for Optical Engineering), Smart Structures and Materials, 1997, Mathematics and Control in Smart Structures, Vol. 3039, pp. 559-570 https://doi.org/10.1117/12.276574
  2. 황재석, 이효재, 1998, '형상기억효과를 가진 투과형 광탄성 모델재료 개발에 관한 연구,' 대한기계학회논문집, 대한기계학회, 제22권 제3호, pp. 2237-2247
  3. Van Humbeeck Ir. J., , 1992, 'The Growth of Shape Memory Application in Europe,' Materials Research Society Symposium Proc., Vol. 246, pp. 377-402
  4. Ley T. J., Stice J. D., 1992, 'Development of retractable bone probe using shape memory alloys,' Materials Research Society Symposium Proc., Vol. 246, pp. 399-402
  5. Ping-Hua Lin, Hisaaski Tobushi, Kikuaki Tanaka, Akira Ikai, 1996, 'Deformation Properties of TiNi Shape Memory Alloy,' JSME International Journal, Series A, Vol. 39, No. 1, pp. 108-116
  6. 丹久保 熙康, 1984, 形狀記憶合金, 産業圖書, pp. 53-83
  7. Jean, R. D., Hu C. T., 1994, 'Shape Memory Effects by Constant -stress Aging in Ti50.50at%Ni Alloy,' Journal of Material Science, Vol. 29, pp. 449-455 https://doi.org/10.1007/BF01162505
  8. Jiang K. R., Penn L. S., 1992, 'Improved Analysis and Experimental Evaluation of the Single Filament Pull-out Test,' Composites Science and technology, Vol. 46, pp. 89-103 https://doi.org/10.1016/0266-3538(92)90031-W
  9. Goettler R. W., Faber K. T., 1989, 'Interfacial Shear Stresses in Fiber-Reinforced Glasses,' Composites Science and Technology, Vol. 37, pp. 129-147 https://doi.org/10.1016/0266-3538(90)90096-N
  10. Marshall D. B., Cox B. N., 1985, 'The Mechanics of Matrix Cracking in Brittle-matrix Fiber composites,' Acta Metall., Vol. 33, pp. 2013-21 https://doi.org/10.1016/0001-6160(85)90124-5
  11. Broutman L. J., 1963, Interfaces in Composites, ASTM STP 327, p. 133
  12. Favre J. P., Perrin J., 1972, Journal of Material Science, Vol.. 7, No. 1113 https://doi.org/10.1007/BF00550192
  13. Chua and Piggott, 1986, 'Recent Studies of the Glass Fiber-Polymer interface,' Ind. Eng. Chem. Prod. Res. Devel., Vol. 26, pp. 672-701
  14. 문인동, 1985, 금속조직에칭기술, 청문각, pp. 100-103
  15. 김경렬, 1999, 등방성체/등방성체 이종재료용 동적 광탄성 실험의 Hybrid법 개발에 관한 연구, 영남대학교 석사학위논문, pp. 40-45
  16. Jonnalagadda K., Kline G. E., Sottos N. R., 1997, 'Local Displacement and Load Transfer in Shape Memory Alloy Composites,' Experimental Mechanics, Vol. 37, No. 1, pp. 78-86 https://doi.org/10.1007/BF02328753