Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

An Analysis of Dynamic Characteristics of Air-Lubricated Slider Bearing by Using Perturbation Method

섭동법을 이용한 공기윤활 슬라이더 베어링의 동특성 해석

  • Published : 2000.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

This study presents a method for determining bearing stiffness and damping coefficients of air-lubricated slider bearing, and shows influences of air-bearing surface geometry(recess depth, crown an d pivot location) on flying attitude and dynamic characteristics. To derive the dynamic lubrication equation, the perturbation method is applied to the generalized lubrication equation which based on linearized Boltzmann equation. The generalized lubrication equation and the dynamic lubrication equation are converted to a control volume formulation, and then, the static and dynamic pressure distributions are calculated by finite difference method. The recess depth and crown of the slider show significantly influence on flying attitude and dynamic characteristics comparing with those of pivot location.

Keywords

References

  1. Hardie, C, Menon, A., Crane, P., and Egbert, D., 1994, 'Analysis and Performance Characteristics of the Seagate Advanced Air Bearing Slider,' IEEE Transactions on Magnetics, Vol. 30, No. 2, pp. 424-432 https://doi.org/10.1109/20.312297
  2. Ono, K., 1975, 'Dynamic Characteristics of Air-Lubricated Slider Bearing for Noncontact Magnetic Recording,' ASME Journal of Lubrication Technology, Vol. 97, No. 2, pp. 250-260
  3. Kogure, K., Fukui, S., Mitsuya, Y., and Kaneko, R., 1983, 'Design of Negative Pressure Slider for Magnetic Recording Disks,' ASME Journal of Lubrication Technology, Vol. 105, pp. 496-502
  4. 장인배, 한동철, 1990, '마그네틱 헤드 슬라이더의 극소 공기막에 대한 동특성 해석,' 대한기계학회논문집, 제14권 제6호, pp. 1487-1494
  5. Burgdorfer, A., 1959, 'The Influence of the Molecular Mean Free Path on the Performance of Hydrodynamic Gas Lubricated Bearings,' ASME Journal of Basic Engineering, Vol. 81, No. 1, pp. 94-100
  6. Deng, Z., Mitsuya, Y., and Ohka, M., 1997, 'Flying Characteristics of Head Sliders when Travelling over Magnetic Disk Surfaces,' International Conference on Micromechatronics for Information and Precision Equipment, Tokyo, pp. 90-95
  7. 장건희, 김영주, 1998, '일반적인 회전축 계의 5자유도를 고려한 동압 유체 베어링의 동특성 계수 해석,' 대한기계학회논문집, 제22권 제9호, pp. 1713-1723
  8. Bogy, D. B., Zeng, Q. H., and Chen, L. S., 1997, 'Air-Bearing Designs for Stable Performance in Proximity Magnetic Recording,' International Conference on Micromechatronics for Information and Precision Equipment, Tokyo, pp. 65-70
  9. Zeng, Q.H. and Bogy, D.B., 1999, 'Experimental Evaluation of Stiffness and Damping of Slider-Air Bearings in Hard Disk Drives,' ASME Journal of Tribology, Vol. 121, pp. 102-107
  10. Fukui, S. and Kaneko, R., 1988, Analysis of Ultra-Thin Gas Film Lubrication Based on Linearized Boltzmann Equation: First Report-Derivation of a Generalized Lubrication Equation Including Thermal Creep Flow, ASME Journal of Tribology, Vol. 110, pp. 253-262
  11. Partankar, S. V., 1980, Numerical Heat Transfer and Fluid Flow, McGraw-Hill, New York, NY
  12. Hu, Y and Bogy, D.B., 1997, 'Dynamic Stability and Spacing Modulation of Sub-25 nm Flying Height Sliders,' ASME Journal of Tribology, Vol. 119, No. 4, pp. 646-652