GMA용접 시스템의 동적 거동에 대한 해석

Analysis of Dynamic Behavior in GMAW System

  • 이재영 (한국과학기술원 기계공학과) ;
  • 최재형 (한국과학기술원 기계공학과) ;
  • 이지혜 (한국과학기술원 기계공학과) ;
  • 유중돈 (한국과학기술원 기계공학과)
  • 발행 : 2000.10.01

초록

Dynamic behaviors of the GMAW system are simulated using the short-circuit transfer model and the characteristic equations fir the power supply, wire system and arc. The conventional wire equation, which relates the rate change of the wire extension to the wire feed rate and melting rate, is modified to include effects of the molten drop attached at the wire tip. The modified wire equation describes behaviors of the GMAW system more precisely and provides information about the initial bridge volume for short-circuit transfer. The proposed short-circuit model predicts the variation of parameters such as the current, voltage, short-circuit frequency and time considering the effects of the surface tension and electromagnetic force due to current. The calculated results are in broad agreements with the experimental results under the argon shielding condition.

키워드

참고문헌

  1. Welding International v.10 no.8 Modeling of an arc sensor for DC MIG/MAG welding in open arc mode : Study on the improvement of the sensitivity and the reliability of the arc sensor in GMA welding (1st report) M. Ushio;W. Mao
  2. Welding International v.12 no.4 Dynamic characteristics of an arc sensor in GMA welding in dip transfer mode : Study of improvement of sensitivity and reliability of arc sensor in GMA welding (3rd report) M. Ushio;W. Mao
  3. Welding Journal v.73 no.10 An electrode extension model for gas metal arc welding T.P. Quinn;R.B. Madigan;T.A. Siewert
  4. Welding Journal v.73 no.2 The influence of power source dynamics on wire melting rate in pulsed GMA welding I.M. Richardson;P.W. Bucknall;I. Stares
  5. The physics of welding (2nd Ed.) J. F. Lancaster
  6. 대한용접학회지 v.14 no.1 가스 메탈 아크 용접에서 스패터 감소를 위한 용접 전원 제어에 관한 연구 황주호;문형순;나석주;한광수
  7. Welding International v.7 no.8 Relationship governing droplet transfer during a short circuit Y.S. Ishchenko
  8. 대한용접학회지 v.15 no.3 VOF 방법을 이용한 GMA 용접의 금속이행에 관한 동적해석 (I)- 입상용적과 스프레이 이행 모드의 해석 최상균;유중돈;김용석
  9. 대한용접학회지 v.15 no.3 VOF 방법을 이용한 GMA 용접의 금속이행에 관한 동적해석 (II)- 단락이행 모드의 해석 최상균;고성훈;유중돈;김용석
  10. 용접.접합 편란 대한용접학회
  11. Proc. inst. of Mech. Engrs A study on prediction of welding current in GMAW J.W. Kim;S.J. Na
  12. Welding handbook(8th Ed.) v.2
  13. Welding handbook (8th Ed.) v.2 AWS