A Study on the Precision Cutting Characteristics for Different Cutting Edge Radii in Ductile Material

절인반경차이에 따른 연질재료의 정밀가공 특성 연구

  • Published : 2000.02.01

Abstract

This paper deals with the precision cutting characteristics of mono-crystal diamonds poly-crystal diamonds and tungsten carbide tool on ductile material. The cutting tests were carried out under various uncut chip areas and 20${\mu}{\textrm}{m}$ depth of engagement. The machinability in precision machining was discussed from the viewpoints of the normal cutting forces and the surface roughness of the workpiece. As the feed rate decreases the normal force difference for cutting edge radii appears to large. In various cutting edge radii the surface roughness difference when cut the copper which is ductile material than the aluminium alloy is large. As the same cutting condition the hardness value on cut surface with the diamond tool appears to be smaller than that of the tungsten carbide tool.

Keywords

References

  1. Annals of the CIRP v.43 no.1 Measurement of Surface roughnesses and Topography at Nanometer Levels by Diffuse X-Ray Scat-tering D.K.Bowen;M.Wormington
  2. Proceedings of the 7th IPE Ultra-Precision Machining of Oxygen-Free Copper and Aluminium H.Endo;H. Senda;S.Yasuba;E.Marui
  3. Nanotechnology v.3 no.1 Minimum Thickness of Cut in Microma-chining N.Ikawa;S.Shimade;H.Tanaka
  4. Nanotechnology v.3 no.1 Single Point Machining technology of a Supersmooth Surface Using a Flying Tool T.Enomoto;Y.Tani;H.Sato;Y.Kamimura
  5. Annals of the CIRP v.43 no.1 Aspects of Surface Generation in Orthogonal Ultraprecision Machining D.A.Lucca;Y.W.Seo
  6. JSME inter-national Journal Series Ⅲ v.34 no.4 A Study on the microcutting of Aluminium Single Crystals M.Sato;T.Yamazaki;Y.Shimizu;T.Takab-ayashi
  7. 金屬切削理論 서남섭
  8. 한국정밀공학회지 v.14 no.2 직선날 다이아몬드 공구에 의한 A1합금의 정밀가공특성 연구 유기현;정진용;권용기;서남섭
  9. Annals of the CIRP v.39 no.1 Measuring the Very Small Cutting-Edge Radius for a Diamond Tool Using a New Kind of SEM Having Two Detectors S.Asai;Y.Taguchi;K.Horio;T.Kasai
  10. Annals of the CIRP v.40 no.2 Ultraprecision Metal Cutting-The Past, the Present and the Future N.Ikawa;R. Donaldson;R. Komanduri;W. Archen