Grain orientation distribution of the ZrB $_{2 }$ - ZrCcomposite sintered by the different sintering technique

소결방법에 따른 ZrB $_{2 }$ - ZrC 복합체에서의 결정립 방위 분포의 변화

  • ;
  • Y. Yasutomi (Research and Development Laboratory, Japan Fine Center, Japan) ;
  • Y. Takigawa (Research and Development Laboratory, Japan Fine Center, Japan) ;
  • H. Yanagida (Research and Development Laboratory, Japan Fine Center, Japan) ;
  • ;
  • 심승환 (한양대학교 세라믹공정연구센터) ;
  • ;
  • ;
  • ;
  • 오근호 (한양대학교 세라믹공정연구센터) ;
  • 심광보 (한양대학교 세라믹공정연구센터)
  • Published : 2000.04.01

Abstract

The crystallographic grain orientation of {{{{ { ZrB}_{2 } }}}}-ZrC composite sintered by pressureless a sintering(PLS) and spark plasma sintering (SPS) was analysed by the SEM-EBSP technique. In the case of PLS, (160) plane of {{{{ { ZrB}_{2 } }}}} was oriented to ND direction, (101) and (111) plane of ZrC were oriented to ND direction. In the case of SPS, (0001) plane of {{{{ { ZrB}_{2 } }}}} was strongly oriented to ND direction. Only (001) plane of ZrC was oriented to ND direction. The PLS specimen had weakly oriented grain structure and interface between {{{{ { ZrB}_{2 } }}}} and ZrC was found to be more stable than that of SPS but the SPS specimen had a preferentially oriented grain structure.

상압 소결법(PLS, pressureless sintering) 및 방전가열 소결법(SPS, spark plasma sintering)으로 소결한 {{{{ {ZrB }_{2 } - ZrC }}}} 복합체의 미세구조를 SEM-EBSP 법에 의해 결정기하학적으로 분석하였다. PLS법에 의해 소결된 복합체에서 {{{{ { ZrB}_{2 } }}}}의 (1010) 면은ND(시편에 수직인 방향)로 배향되었고, ZrC 경우 (101) 및 (111)면이 ND방향으로 배향되었다. 한편 SPS법에 위해 소결된 {{{{ { ZrB}_{2 } }}}}의 (0001)A면은 ND방향으로 강하게 배향되었다. ZrC인 경우 (001) 면만이 ND방향으로 배향되었다. PLS법에 의한 소결체의 결정립은 특정방위에 대해 약한 배향을 갖으면서, {{{{ { ZrB}_{2 } }}}}와 ZrC상 계면의 구조적 조화가 우수한 반면, SPS법에 의한 소결체의 결정립들은 특정방향으로 강하게 배향되는 경향을 보인다.

Keywords